[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: large hdd and no bios-update available

To: misc@openbsd.org
Subject: Re: large hdd and no bios-update available
From: "gargarmel@gmx.net" <gargarmel@gmx.net>
Date: Mon, 23 Feb 2004 20:04:02 +0100
References: <1077396994.576.33.camel@book.szeta.de> <40394596.E4DCB013@holland-consulting.net>

hi!

> which doesn't tell me nearly as much as a dmesg....

see attach dmesg.txt

> 
> > after some problems this machine is now up and running.
> 
> the nature of those problems might be interesting to know.

if you look at dmesg.txt there's still a problem with wd0.
i got it so far running that i was able to install obsd.
but my problem in this case is wd1 and only its large folders.

> fdisk and disklabel outputs would be much more useful...

-bash-2.05b# fdisk wd1
Disk: wd1       geometry: 14596/255/63 [234484740 Sectors]
Offset: 0       Signature: 0xAA55
         Starting       Ending       LBA Info:
 #: id    C   H  S -    C   H  S [       start:      size   ]
------------------------------------------------------------------------
 0: 00    0   0  0 -    0   0  0 [           0:           0 ]
unused      
 1: 00    0   0  0 -    0   0  0 [           0:           0 ]
unused      
 2: 00    0   0  0 -    0   0  0 [           0:           0 ]
unused      
*3: A6    0   0 60 - 14596 122  6 [          59:   234492373 ] OpenBSD  


-bash-2.05b# disklabel wd1
# using MBR partition 3: type A6 off 59 (0x3b) size 234492373
(0xdfa11d5)
# /dev/rwd1c:
type: ESDI
disk: ESDI/IDE disk
label: SAMSUNG SV1204H 
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 16383
total sectors: 234493056
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0           # microseconds
track-to-track seek: 0  # microseconds
drivedata: 0 

16 partitions:
#        size   offset    fstype   [fsize bsize   cpg]
  a:  2048197       59    4.2BSD     1024  8192    16   # (Cyl.    0*-
2031)
  b:   614880  2048256      swap                        # (Cyl. 2032 -
2641)
  c: 234493056        0    unused        0     0        # (Cyl.    0 -
232631)
  d:  2048256  2663136    4.2BSD     1024  8192    16   # (Cyl. 2642 -
4673)
  e:  2048256  4711392    4.2BSD     1024  8192    16   # (Cyl. 4674 -
6705)
  g:  8388576  6759648    4.2BSD     1024  8192    16   # (Cyl. 6706 -
15027)
  h:  8388576 15148224    4.2BSD     1024  8192    16   # (Cyl. 15028 -
23349)
  i: 210955632 23536800    4.2BSD     1024  8192    16  # (Cyl. 23350 -
232631*)

> What happens if you put this drive back in the first computer?  I'm
> wondering if the whole size issue is a totally wrong track, and
> instead, the disk picked up a bad spot...
> 
> The BIOS really has nothing to do with anything once OpenBSD is
> booted.

well. the disk was running in the old machine without any problems. 
i'll give it a try when i can halt the machine later this evening.

probably someone has another idea with this additional information. :)

thanks alot. greets, Ralph.
OpenBSD 3.4 (GENERIC) #18: Wed Sep 17 03:34:47 MDT 2003
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II (Klamath) ("GenuineIntel" 686-class, 512KB L2 cache) 233 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX
real mem  = 67739648 (66152K)
avail mem = 56938496 (55604K)
using 852 buffers containing 3489792 bytes (3408K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(77) BIOS, date 12/15/98, BIOS32 rev. 0 @ 0xfd821
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf30/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443LX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443LX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Pro" rev 0x5c
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM BIGFOOT_CY4320A>
wd0: 16-sector PIO, LBA, 4028MB, 8184 cyl, 16 head, 63 sec, 8249472 sectors
wd1 at pciide0 channel 0 drive 1: <SAMSUNG SV1204H>
wd1: 16-sector PIO, LBA, 32253MB, 16383 cyl, 16 head, 63 sec, 66055248 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-ROM CR-585, ZB21> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 0, DMA mode 1
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x01 at pci0 dev 7 function 3 not configured
wi0 at pci0 dev 9 function 0 "3Com 3crwe777a AirConnect" rev 0x02: irq 12
wi0: "3Com, 3CRWE777A AirConnect Wireless LAN PCI Card, Version 01.02"
wi0: PRISM2 HWB3163 rev.A, Firmware 0.3.0 (primary), 0.8.3 (station), address 00:04:75:88:bf:5a
ne3 at pci0 dev 10 function 0 "Realtek 8029" rev 0x00: irq 11
ne3: address 00:e0:7d:77:dc:c7
rl0 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 11 address 00:30:84:0d:41:77
rlphy0 at rl0 phy 0: RTL internal phy
clcs0 at pci0 dev 18 function 0 "Cirrus Logic CS4610 SoundFusion Audio" rev 0x01: irq 10
clcs0: codec ready timeout
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
wss1 at isapnp0 "Crystal Audio, CSC0000, , WSS/SB" port 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0: CS4236/CS4236B (vers 0)
audio0 at wss1
joy0 at isapnp0 "Crystal Audio, CSC0001, , GAME" port 0x200/8
"Crystal Audio, CSC0010, , CTRL" at isapnp0 port 0x120/8 not configured
"Crystal Audio, CSC0003, , MPU" at isapnp0 port 0x330/2 not configured
biomask d040 netmask d840 ttymask d842
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wd0(pciide0:0:0): timeout
	type: ata
	c_bcount: 16384
	c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x61
wd0a: device timeout writing fsbn 3307168 of 3307168-3307199 (wd0 bn 3307231; cn 3280 tn 15 sn 46), retrying
wd0: soft error (corrected)

References:
- large hdd and no bios-update available
  - From: "gargarmel@gmx.net" <gargarmel@gmx.net>
- Re: large hdd and no bios-update available
  - From: Nick Holland <nick@holland-consulting.net>

Prev by Date: Re: Trouble getting FTP through NAT (SOLVED)
Next by Date: vlan setup, arp issue
Prev by thread: Re: large hdd and no bios-update available
Next by thread: qt3 on Openbsd 3.4
Index(es):
- Date
- Thread