Re: Installing SMC9452TX gigabit ethernet

[Gary Wilson <usrlnx@yahoo.com>]

dmesg output below

--- STeve Andre' <andres@msu.edu> wrote:
> Include dmesg output.  Without that, no one can know
> if the
> card is in fact being recognized, or if you have a
> new model,
> or if you have some other problem.
> 
> --STeve Andre'
> 
> On Tuesday 02 March 2004 09:32 am, Gary Wilson
> wrote:
> > I'm trying to install an SMC9452TX Gigabit adaptor
> > into a 3.4 system
> > (i386). The card works and is recognized by
> FreeBSD,
> > which automatically
> > uses the SysKonnect driver.
> >
> > The card is on supported hardware list. I've
> searched
> > for reports of
> > problems like this, but have found none in the
> > archives or on google.
> >
> > Any suggestions for how to make it work. The
> system
> > itself is running
> > just fine and sees the builtin Intel 100 card
> (fxp0).

OpenBSD 3.4 (GENERIC) #18: Wed Sep 17 03:34:47 MDT
2003
   
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 1.70
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SIMD,SIMD2,SS,HTT,TM
real mem  = 267759616 (261484K)
avail mem = 242167808 (236492K)
using 3294 buffers containing 13492224 bytes (13176K)
of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/08/00,
BIOS32 rev. 0 @ 0xfda74
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf3130/208
(11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel
82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82850 Host" rev
0x02
ppb0 at pci0 dev 1 function 0 "Intel 82850/82860 AGP"
rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage 128 Pro TF"
rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev
0x02
pci2 at ppb1 bus 2
fxp0 at pci2 dev 8 function 0 "Intel 82562" rev 0x01:
irq 11, address 00:03:47:68:7f:93
inphy0 at fxp0 phy 1: i82562EM 10/100 media interface,
rev. 0
unknown vendor 0x11ab product 0x4320 (class network
subclass ethernet, rev 0x12) at pci2 dev 12 function 0
not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC"
rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE"
rev 0x02: DMA, channel 0 wired to compatibility,
channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 39205MB, 16383 cyl, 16 head,
63 sec, 80293248 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
sd0 at scsibus0 targ 0 lun 0: <IOMEGA, ZIP 250, 41.S>
SCSI0 0/direct removable
sd0: drive offline
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
sd0(pciide0:0:1): using PIO mode 3, Ultra-DMA mode 2
atapiscsi1 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi1: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HP, CD-Writer cd12n,
1.34> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB"
rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801BA SMBus" rev 0x02 at pci0 dev 31 function
3 not configured
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB2"
rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub1: 2 ports with 2 removable, self powered
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97
Audio" rev 0x02: irq 9, ICH2 AC97
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat
Stereo
audio0 at auich0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte
fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c460 netmask cc60 ttymask dce2
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302


__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster
http://search.yahoo.com