[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Howto disable "arp info overwritten for" message
- To: <misc@openbsd.org>
- Subject: Howto disable "arp info overwritten for" message
- From: "Kevin Barrass" <Kevin.barrass@swyt.nhs.uk>
- Date: Wed, 3 Mar 2004 13:39:36 -0000
- content-class: urn:content-classes:message
- Thread-Index: AcQBJRcOcUSvlMF1S+KSL4T6lU0nag==
- Thread-Topic: Howto disable "arp info overwritten for" message
Hi
How can I disable the below errors as they are filling up my
syslog/dmesg etc. I know where the fault is it's a windows server with a
pair of teamed network cards unfortunately I have no control over those
servers.
Kind Regards
Kev
Iam running OpenBSD 3.4 with all the latest Errata applied on a GENERIC
kernel with Latest Errata applied. Please see dmesg below and my
dmesg.boot
## dmesg ##
arp info overwritten for 10.1.4.86 by 00:b0:d0:b0:de:84 on rl0
arp info overwritten for 10.1.4.86 by 00:b0:d0:b0:de:83 on rl0
arp info overwritten for 10.1.4.86 by 00:b0:d0:b0:de:84 on rl0
arp info overwritten for 10.1.4.86 by 00:b0:d0:b0:de:83 on rl0
arp info overwritten for 10.1.4.86 by 00:b0:d0:b0:de:84 on rl0
arp info overwritten for 10.1.4.86 by 00:b0:d0:b0:de:83 on rl0
arp info overwritten for 10.1.4.86 by 00:b0:d0:b0:de:84 on rl0
arp info overwritten for 10.1.4.86 by 00:b0:d0:b0:de:83 on rl0
arp info overwritten for 10.1.4.86 by 00:b0:d0:b0:de:84 on rl0
arp info overwritten for 10.1.4.86 by 00:b0:d0:b0:de:83 on rl0
arp info overwritten for 10.1.4.162 by 00:06:5b:19:69:f7 on rl0
## dmesg.boot ##
OpenBSD 3.4 (GENERIC) #0: Thu Feb 19 11:37:42 GMT 2004
kevin@darkstar.swyt.nhs.uk:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 652 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SIMD
real mem = 335065088 (327212K)
avail mem = 304132096 (297004K)
using 4115 buffers containing 16855040 bytes (16460K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(48) BIOS, date 10/15/99, BIOS32 rev. 0 @
0xfb250
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb6d0
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf00/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 3 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB PCI-ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Matrox MGA G200 AGP" rev 0x03
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
clcs0 at pci0 dev 4 function 0 "Cirrus Logic CS4614" rev 0x01: irq 12
ac97: codec id 0x43525903 (Cirrus Logic CS4297 rev 3)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at clcs0
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compa
tibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL EX3.2A>
wd0: 16-sector PIO, LBA, 3079MB, 6256 cyl, 16 head, 63 sec, 6306048
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI-CD, ROM-DRIVE-50MAX, 50LT> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not
configured
rl0 at pci0 dev 15 function 0 "Realtek 8139" rev 0x10: irq 10 address
00:c0:f0:81:87:cf
rlphy0 at rl0 phy 0: RTL internal phy
vr0 at pci0 dev 16 function 0 "VIA RhineII-2" rev 0x43: irq 12 address
00:50:ba:fb:1f:9d
ukphy0 at vr0 phy 8: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0005be, model 0x0008, rev. 0
xl0 at pci0 dev 18 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 11
address 00:50:04:10:54:fe
exphy0 at xl0 phy 24: 3Com internal media interface
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c048 netmask dc48 ttymask dcca
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302