New Poweredge 1750 scsi/net not working with 3.4-current

[Andre Dalle <andre@dalle.ca>]

I'm having some trouble getting my Poweredge 1750 going.  The on-board
Broadcom 5704C NICs are coming up unconfigured, as is the SCSI system.

The Intel NIC in the PCI slot does work, so I guess I could order a second
Intel NIC and disable the onboard Broadcom NICs - but archives suggest that
others have gotten these NICs working.

I used the floppy34.fs and floppy35.fs from the i386 snapshot on the FTP site,
with the same results.

Here is the dmesg from boot off floppy34.fs:

OpenBSD 3.4-current (RAMDISK) #119: Wed Feb 18 00:25:12 MST 2004
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.39 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 536293376 (523724K)
avail mem = 493592576 (482024K)
using 4278 buffers containing 26918912 bytes (26288K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/13/04, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfc4a0/144 (7 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1166 product 0x0201
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xec000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE" rev 0x33
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE" rev 0x00
pci1 at pchb1 bus 1
em0 at pci1 dev 4 function 0 "Intel PRO/1000MT (PWLA8492MT)" rev 0x01: irq 7, address: 00:04:23:a6:4b:b2
em1 at pci1 dev 4 function 1 "Intel PRO/1000MT (PWLA8492MT)" rev 0x01: irq 5, address: 00:04:23:a6:4b:b3
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE" rev 0x00
pci2 at pchb2 bus 3
vga1 at pci0 dev 14 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pchb3 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
"ServerWorks OSB4/CSB5 USB" rev 0x05 at pci0 dev 15 function 2 not configured
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI" rev 0x00
pchb4 at pci0 dev 16 function 0 "ServerWorks CIOB-E" rev 0x12
pchb5 at pci0 dev 16 function 2 "ServerWorks CIOB-E" rev 0x12
pci3 at pchb5 bus 2
"Broadcom BCM5704C" rev 0x02 at pci3 dev 0 function 0 not configured
"Broadcom BCM5704C" rev 0x02 at pci3 dev 0 function 1 not configured
pchb6 at pci0 dev 17 function 0 "ServerWorks CIOBX2" rev 0x05
pchb7 at pci0 dev 17 function 2 "ServerWorks CIOBX2" rev 0x05
pci4 at pchb7 bus 4
vendor "Symbios Logic", unknown product 0x30 (class mass storage subclass SCSI, rev 0x07) at pci4 dev 5 function 0 not configured
vendor "Symbios Logic", unknown product 0x30 (class mass storage subclass SCSI, rev 0x07) at pci4 dev 5 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask c0e0 ttymask c0e2
rd0: fixed, 3560 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02


-- 
Andre Dalle                   [andre@dalle.ca]
Shogun of Sorrow