Re: wi(4) fixes

[b h <bobhumphrey22@yahoo.com>]

Hi,

I would LOVE it, if I could get the Asus on board/WIFI
slot wireless working.  I wrote a message a while ago
here about the card/product with no feedback....

http://marc.theaimsgroup.com/?l=openbsd-misc&m=107715788532567&w=2

I've found this msg on freebsd-bugs and don't know if
its a related card

http://marc.theaimsgroup.com/?l=freebsd-bugs&m=106399325116413&w=2

I unfortunately don't have the money to spend on a
motherboard/wireless for a developer (these
motherboards unfortunately aren't cheap - see original
msg linked above for details), but was wondering if
someone knew how to get these working - it might be
something simpler that I'm missing as opposed to lack
of kernel support.

At the very bottom of this email is my dmesg (with the
card plugged in the special WIFI slot on the
motherboard of course)....

ideas appreciated. thanks
b.

--- "Todd C. Miller" <Todd.Miller@courtesan.com>
wrote:
> The following diff, relative to OpenBSD 3.4
> (-current will require
> simple hand-patching for one hunk), makes HostAP
> work on Prism cards
> with newer firmware (1.7.0 and higher) and fixes
> some timing issues
> that caused some prism-based cards to be unstable.
> 
> If you have been having intermittent problems with a
> wireless card
> that uses the wi(4) driver I would be interested in
> hearing whether
> or not this helps things.  I'm especially interested
> in hearing
> about native PCI-based cards (ie: not using a host
> adapter) since
> I don't own any of that type.
> 
>  - todd
> 



OpenBSD 3.4-current (RAMDISK_CD) #113: Fri Feb 20
17:55:24 MST 2004
   
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz
("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V76,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 1072476160 (1047340K)
avail mem = 989995008 (966792K)
using 4278 buffers containing 53727232 bytes (52468K)
of memory
mainbus0 (root)
bios0 at mainbus0: AT/276+(00) BIOS, date 06/12/93,
BIOS32 rev. 0 @ 0xf0010
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf53d0/240
(13 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel
82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xd000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev
0x02
ppb0 at pci0 dev 1 function 0 "Intel 82875P AGP" rev
0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "ATI", unknown
product 0x4e48 rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
vendor "ATI", unknown product 0x4e68 (class display
subclass miscellaneous, rev 0x00) at pci1 dev 0
function 1 not configured
ppb1 at pci0 dev 3 function 0 "Intel 82875P PCI-CSA"
rev 0x02
pci2 at ppb1 bus 2
em0 at pci2 dev 1 function 0 "Intel PRO/1000
(82547EI)" rev 0x00: irq 5, address: 00:0c:6e:6e:f9:74
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB"
rev 0x02: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB"
rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB"
rev 0x02: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB"
rev 0x02: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub3: 2 ports with 2 removable, self powered
"Intel 82801EB/ER USB" rev 0x02 at pci0 dev 29
function 7 not configured
ppb2 at pci0 dev 30 funciton 0 "Intel 82801BA AGP" rev
0xc2
pci3 at ppb2 bus 3
"VIA VT6306 FireWire" rev 0x80 at pci3 dev 3 function
0 not configured
unknown vendor 0x1814 product 0x0101 (class network
subclass miscellaneous, rev 0x00) at pci3 dev 13
function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC"
rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER
IDE" rev 0x02: DMA, channel 0 configured to
compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC
WD1200BB-00CAA0>
wd0: 16-sector PIO, LBA, 114473MB, 234441648 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 96147H8>
wd1: 16-sector PIO, LBA, 58623MB, 120060853 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI, CD-RW 40x12,
V.MW> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31
function 3 not configured
"Intel 82801EB/ER AC97 AUdio" rev 0x02 at pci0 dev 31
funciton 5 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte
fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte
fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask c460 netmask c460 ttymask c462
rd0: fixed, 3560 blocks
wd0: no disk label
wd1: no disk label
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
X10 Wireless Technology Inc USB Receiver, class 0/0,
rev 1.10/1.00, addr 2, uhub0 port 1 not configured


__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster
http://search.yahoo.com