[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: LaCie USB 2.0 hard drive on OpenBSD 3.5

To: Lawrence Teo <lteo.openbsd1@mailnull.com>
Subject: Re: LaCie USB 2.0 hard drive on OpenBSD 3.5
From: Marco Peereboom <slash@peereboom.us>
Date: Sat, 1 May 2004 23:33:46 -0500
Cc: misc@openbsd.org
References: <4094361F.6000503@mailnull.com>

Send us a "disklabel sd0"

On May 1, 2004, at 6:43 PM, Lawrence Teo wrote:

> I ran into problems using a 250GB LaCie P3 USB 2.0 hard drive on an
> OpenBSD 3.5 system, and I was wondering if someone knows the solution.
>
> The problem is that OpenBSD refuses to mount the filesystem on the hard
> drive. The filesystem is formatted as FAT32 but OpenBSD does not want  
> to
> recognize it:
>
>
> root# mount /dev/sd0i /mnt/usbdrive
> mount_msdos: /dev/sd0i on /mnt/usbdrive: not an MSDOS filesystem
>
> root# mount -t msdos /dev/sd0i /mnt/usbdrive
> mount_msdos: /dev/sd0i on /mnt/usbdrive: not an MSDOS filesystem
>
> root# mount -t msdos /dev/sd0c /mnt/usbdrive
> mount_msdos: /dev/sd0c on /mnt/usbdrive: Inappropriate file type or  
> format
>
> root# mount -t msdos /dev/sd0a /mnt/usbdrive
> mount_msdos: /dev/sd0a on /mnt/usbdrive: Device not configured
>
>
> Here's my fdisk output:
>
>
> -bash-2.05b# fdisk sd0
> fdisk: sysctl(machdep.bios.diskinfo): Device not configured
> Disk: sd0       geometry: 238475/64/32 [488397168 Sectors]
> Offset: 0       Signature: 0xAA55
>          Starting       Ending       LBA Info:
>  #: id    C   H  S -    C   H  S [       start:      size   ]
> ----------------------------------------------------------------------- 
> -
> *0: 0C    0   1 32 - 238472  44  1 [          63:   488392002 ] Win95  
> FAT32L
>  1: 00    0   0  0 -    0   0  0 [           0:           0 ] unused
>  2: 00    0   0  0 -    0   0  0 [           0:           0 ] unused
>  3: 00    0   0  0 -    0   0  0 [           0:           0 ] unused
>
>
> My dmesg is as follows (I inserted the USB hard drive after booting  
> up):
>
>
> OpenBSD 3.5 (GENERIC) #34: Mon Mar 29 12:24:55 MST 2004
>     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) III Mobile CPU 1200MHz ("GenuineIntel"
> 686-class) 1.20 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX, 
> FXSR,SSE
> real mem  = 267931648 (261652K)
> avail mem = 242102272 (236428K)
> using 3296 buffers containing 13500416 bytes (13184K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 11/26/01, BIOS32 rev. 0 @  
> 0xffe90
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 100%
> apm0: AC on, battery charge high, charging, estimated 5:45 hours
> pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfbc20/192 (10 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE"
> rev 0x00)
> pcibios0: PCI bus #4 is the last bus
> bios0: ROM list: 0xc0000/0xd000 0xcd000/0x800! 0xcd800/0x800!
> 0xce000/0x800! 0xce800/0x800! 0xcf000/0x800! 0xcf800/0x800!
> 0xd0000/0x800 0xd0800/0x800! 0xd1000/0x800! 0xd1800/0x800
> 0xd2000/0x800!extent_alloc_region: can't allocate region descriptor
> :12 0xd2800/0x800!extent_alloc_region: can't allocate region descriptor
> :12 0xd3000/0x800extent_alloc_region: can't allocate region descriptor
> :12 0xd3800/0x800extent_alloc_region: can't allocate region descriptor
> :12
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04
> ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x04
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 Go" rev 0xb2
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x03
> pci2 at ppb1 bus 2
> esa0 at pci2 dev 3 function 0 "ESS Maestro 3" rev 0x10: irq 5
> ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
> ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
> audio0 at esa0
> xl0 at pci2 dev 6 function 0 "3Com 3c556 100Base-TX" rev 0x10: irq 10
> address 00:04:76:49:81:72
> ukphy0 at xl0 phy 0: Generic IEEE 802.3u media interface
> ukphy0: OUI 0x00c000, model 0x0000, rev. 0
> "3Com Mini-PCI V.90 Modem" rev 0x10 at pci2 dev 6 function 1 not  
> configured
> cbb0 at pci2 dev 15 function 0 "Texas Instruments PCI4451 CardBus" rev
> 0x00: irq 10
> cbb1 at pci2 dev 15 function 1 "Texas Instruments PCI4451 CardBus" rev
> 0x00: irq 10
> "Texas Instruments PCI4451 FireWire" rev 0x00 at pci2 dev 15 function 2
> not configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
> pcmcia1 at cardslot1
> pcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x03
> pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x03: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <IC25N020ATDA04-0>
> wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 3.7C> SCSI0 5/cdrom  
> removable
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x03: irq 10
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask 4440 netmask 4440 ttymask 54c2
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> umass0 at uhub0 port 1 configuration 1 interface 0
> umass0: LaCie LaCie Hard Drive USB, rev 2.00/0.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: <WDC, WD2500JB-00FUA0, 15.0> SCSI2
> 0/direct fixed
> sd0: 238475MB, 238475 cyl, 64 head, 32 sec, 512 bytes/sec, 488397168  
> sec
> total
>
>
> I would really appreciate any suggestions on how to solve this problem.
>
> Thanks,
> Lawrence

Follow-Ups:
- Re: LaCie USB 2.0 hard drive on OpenBSD 3.5
  - From: Lawrence Teo <lteo.openbsd1@mailnull.com>

References:
- LaCie USB 2.0 hard drive on OpenBSD 3.5
  - From: Lawrence Teo <lteo.openbsd1@mailnull.com>

Prev by Date: Re: OT: milter-spamd
Next by Date: Re: LaCie USB 2.0 hard drive on OpenBSD 3.5
Prev by thread: LaCie USB 2.0 hard drive on OpenBSD 3.5
Next by thread: Re: LaCie USB 2.0 hard drive on OpenBSD 3.5
Index(es):
- Date
- Thread