[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: LaCie USB 2.0 hard drive on OpenBSD 3.5
Hmmm, isn't this thing a little big for a USB key?
250059350016 bytes = 232GB; something is screwed up here.
You need to rig a kernel to do some SCSI debugging to see what the heck
is up.
On May 1, 2004, at 11:51 PM, Lawrence Teo wrote:
> Here's the output of "disklabel sd0":
>
> root# disklabel sd0
> disklabel: warning, DOS partition table with no valid OpenBSD partition
> # /dev/rsd0c:
> type: SCSI
> disk: SCSI disk
> label: WD2500JB-00FUA0
> flags:
> bytes/sector: 512
> sectors/track: 32
> tracks/cylinder: 64
> sectors/cylinder: 2048
> cylinders: 238475
> total sectors: 488397168
> rpm: 3600
> interleave: 1
> trackskew: 0
> cylinderskew: 0
> headswitch: 0 # microseconds
> track-to-track seek: 0 # microseconds
> drivedata: 0
>
> 16 partitions:
> # size offset fstype [fsize bsize cpg]
> c: 488397168 0 unused 0 0 # (Cyl. 0 -
> 238475*)
> i: 488392002 63 MSDOS # (Cyl. 0*-
> 238472*)
>
>
>
>
> Marco Peereboom wrote:
>> Send us a "disklabel sd0"
>> On May 1, 2004, at 6:43 PM, Lawrence Teo wrote:
>>> I ran into problems using a 250GB LaCie P3 USB 2.0 hard drive on an
>>> OpenBSD 3.5 system, and I was wondering if someone knows the
>>> solution.
>>>
>>> The problem is that OpenBSD refuses to mount the filesystem on the
>>> hard
>>> drive. The filesystem is formatted as FAT32 but OpenBSD does not
>>> want to
>>> recognize it:
>>>
>>>
>>> root# mount /dev/sd0i /mnt/usbdrive
>>> mount_msdos: /dev/sd0i on /mnt/usbdrive: not an MSDOS filesystem
>>>
>>> root# mount -t msdos /dev/sd0i /mnt/usbdrive
>>> mount_msdos: /dev/sd0i on /mnt/usbdrive: not an MSDOS filesystem
>>>
>>> root# mount -t msdos /dev/sd0c /mnt/usbdrive
>>> mount_msdos: /dev/sd0c on /mnt/usbdrive: Inappropriate file type or
>>> format
>>>
>>> root# mount -t msdos /dev/sd0a /mnt/usbdrive
>>> mount_msdos: /dev/sd0a on /mnt/usbdrive: Device not configured
>>>
>>>
>>> Here's my fdisk output:
>>>
>>>
>>> -bash-2.05b# fdisk sd0
>>> fdisk: sysctl(machdep.bios.diskinfo): Device not configured
>>> Disk: sd0 geometry: 238475/64/32 [488397168 Sectors]
>>> Offset: 0 Signature: 0xAA55
>>> Starting Ending LBA Info:
>>> #: id C H S - C H S [ start: size ]
>>> ---------------------------------------------------------------------
>>> -- -
>>> *0: 0C 0 1 32 - 238472 44 1 [ 63: 488392002 ]
>>> Win95 FAT32L
>>> 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
>>> 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
>>> 3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
>>>
>>>
>>> My dmesg is as follows (I inserted the USB hard drive after booting
>>> up):
>>>
>>>
>>> OpenBSD 3.5 (GENERIC) #34: Mon Mar 29 12:24:55 MST 2004
>>> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
>>> cpu0: Intel(R) Pentium(R) III Mobile CPU 1200MHz ("GenuineIntel"
>>> 686-class) 1.20 GHz
>>> cpu0:
>>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
>>> X, FXSR,SSE
>>> real mem = 267931648 (261652K)
>>> avail mem = 242102272 (236428K)
>>> using 3296 buffers containing 13500416 bytes (13184K) of memory
>>> mainbus0 (root)
>>> bios0 at mainbus0: AT/286+(00) BIOS, date 11/26/01, BIOS32 rev. 0 @
>>> 0xffe90
>>> apm0 at bios0: Power Management spec V1.2
>>> apm0: battery life expectancy 100%
>>> apm0: AC on, battery charge high, charging, estimated 5:45 hours
>>> pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
>>> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfbc20/192 (10 entries)
>>> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE"
>>> rev 0x00)
>>> pcibios0: PCI bus #4 is the last bus
>>> bios0: ROM list: 0xc0000/0xd000 0xcd000/0x800! 0xcd800/0x800!
>>> 0xce000/0x800! 0xce800/0x800! 0xcf000/0x800! 0xcf800/0x800!
>>> 0xd0000/0x800 0xd0800/0x800! 0xd1000/0x800! 0xd1800/0x800
>>> 0xd2000/0x800!extent_alloc_region: can't allocate region descriptor
>>> :12 0xd2800/0x800!extent_alloc_region: can't allocate region
>>> descriptor
>>> :12 0xd3000/0x800extent_alloc_region: can't allocate region
>>> descriptor
>>> :12 0xd3800/0x800extent_alloc_region: can't allocate region
>>> descriptor
>>> :12
>>> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
>>> pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04
>>> ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x04
>>> pci1 at ppb0 bus 1
>>> vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 Go" rev 0xb2
>>> wsdisplay0 at vga1: console (80x25, vt100 emulation)
>>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>>> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x03
>>> pci2 at ppb1 bus 2
>>> esa0 at pci2 dev 3 function 0 "ESS Maestro 3" rev 0x10: irq 5
>>> ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
>>> ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
>>> audio0 at esa0
>>> xl0 at pci2 dev 6 function 0 "3Com 3c556 100Base-TX" rev 0x10: irq 10
>>> address 00:04:76:49:81:72
>>> ukphy0 at xl0 phy 0: Generic IEEE 802.3u media interface
>>> ukphy0: OUI 0x00c000, model 0x0000, rev. 0
>>> "3Com Mini-PCI V.90 Modem" rev 0x10 at pci2 dev 6 function 1 not
>>> configured
>>> cbb0 at pci2 dev 15 function 0 "Texas Instruments PCI4451 CardBus"
>>> rev
>>> 0x00: irq 10
>>> cbb1 at pci2 dev 15 function 1 "Texas Instruments PCI4451 CardBus"
>>> rev
>>> 0x00: irq 10
>>> "Texas Instruments PCI4451 FireWire" rev 0x00 at pci2 dev 15
>>> function 2
>>> not configured
>>> cardslot0 at cbb0 slot 0 flags 0
>>> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
>>> pcmcia0 at cardslot0
>>> cardslot1 at cbb1 slot 1 flags 0
>>> cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
>>> pcmcia1 at cardslot1
>>> pcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x03
>>> pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x03: DMA,
>>> channel 0 wired to compatibility, channel 1 wired to compatibility
>>> wd0 at pciide0 channel 0 drive 0: <IC25N020ATDA04-0>
>>> wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
>>> atapiscsi0 at pciide0 channel 0 drive 1
>>> scsibus0 at atapiscsi0: 2 targets
>>> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 3.7C> SCSI0 5/cdrom
>>> removable
>>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
>>> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
>>> pciide0: channel 1 ignored (disabled)
>>> uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x03: irq 10
>>> usb0 at uhci0: USB revision 1.0
>>> uhub0 at usb0
>>> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>>> uhub0: 2 ports with 2 removable, self powered
>>> isa0 at pcib0
>>> isadma0 at isa0
>>> pckbc0 at isa0 port 0x60/5
>>> pckbd0 at pckbc0 (kbd slot)
>>> pckbc0: using irq 1 for kbd slot
>>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>>> pms0 at pckbc0 (aux slot)
>>> pckbc0: using irq 12 for aux slot
>>> wsmouse0 at pms0 mux 0
>>> pcppi0 at isa0 port 0x61
>>> midi0 at pcppi0: <PC speaker>
>>> sysbeep0 at pcppi0
>>> lpt0 at isa0 port 0x378/4 irq 7
>>> npx0 at isa0 port 0xf0/16: using exception 16
>>> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>>> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
>>> biomask 4440 netmask 4440 ttymask 54c2
>>> pctr: 686-class user-level performance counters enabled
>>> mtrr: Pentium Pro MTRR support
>>> dkcsum: wd0 matched BIOS disk 80
>>> root on wd0a
>>> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>>> umass0 at uhub0 port 1 configuration 1 interface 0
>>> umass0: LaCie LaCie Hard Drive USB, rev 2.00/0.00, addr 2
>>> umass0: using SCSI over Bulk-Only
>>> scsibus1 at umass0: 2 targets
>>> sd0 at scsibus1 targ 1 lun 0: <WDC, WD2500JB-00FUA0, 15.0> SCSI2
>>> 0/direct fixed
>>> sd0: 238475MB, 238475 cyl, 64 head, 32 sec, 512 bytes/sec, 488397168
>>> sec
>>> total
>>>
>>>
>>> I would really appreciate any suggestions on how to solve this
>>> problem.
>>>
>>> Thanks,
>>> Lawrence