Re: 3.6 snapshot from 08/27/04 hangs after boot

[Nick Holland <nick@holland-consulting.net>]

Sascha Hanse wrote:
> On Wed, 1 Sep 2004 14:28:11 +0200
> Sascha Hanse <sensei@bsdberlin.org> wrote:
> 
>> Hi,
>> 
>> I wanted to upgrade my 3.5 Box to 3.6, so I used the cd36.iso to make
>> a bootable disc. I booted with the CD and then the bootprogress
>> stopped here:
>> 
>> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>> 
>> The bootprogress just stops without any errors. After some tries, it
>> works but some seconds later the whole process ends with an uvm fault.
>> I couldn't yet write down the fault because the machine reboots
>> immediately. DMESG is attached.
>> 

oh, nerts.

FIRST, Could you try this from ukc>
   ukc> disable wsmux
   quit
and see if it boots nicely?

I realize it isn't what you want to hear, but it would be nice if I'm
wrong on this.


If that doesn't fix it, could you try unplugging your CF flash reader?
(might have to unplug it from the inside of the machine).  Another idea:
disable ohci* (your USB stuff), which would achive much the same results.

However, start with wsmux.  And let us know what happens...

(and I'm heading out for much of the day, so others, please feel free to
jump in with "next steps" in this process...)

Nick.
-- 
http://www.holland-consulting.net