Re: 3.6 snapshot from 08/27/04 hangs after boot

[Sascha Hanse <sensei@bsdberlin.org>]

>Sascha Hanse wrote:
>> On Wed, 1 Sep 2004 14:28:11 +0200
>> Sascha Hanse <sensei@bsdberlin.org> wrote:
>> 
>>> Hi,
>>> 
>>> I wanted to upgrade my 3.5 Box to 3.6, so I used the cd36.iso to
>>> make a bootable disc. I booted with the CD and then the bootprogress
>>> stopped here:
>>> 
>>> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>>> 
>>> The bootprogress just stops without any errors. After some tries, it
>>> works but some seconds later the whole process ends with an uvm
>>> fault. I couldn't yet write down the fault because the machine
>>> reboots immediately. DMESG is attached.
>>> 
>
>oh, nerts.
>
>FIRST, Could you try this from ukc>
>   ukc> disable wsmux
>   quit
>and see if it boots nicely?
>I realize it isn't what you want to hear, but it would be nice if I'm
>wrong on this.
>

ukc> disable wsmux
327 wsmux can't disable pseudo device
ukc> 


>
>If that doesn't fix it, could you try unplugging your CF flash reader?

This was the solution. After removing the flash reader everything worked
fine.

>(might have to unplug it from the inside of the machine).  Another
>idea:
>disable ohci* (your USB stuff), which would achive much the same
>results.
>
>However, start with wsmux.  And let us know what happens...
>
>(and I'm heading out for much of the day, so others, please feel free
>to
>jump in with "next steps" in this process...)
>
>Nick.