[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: weird memory size at le1
- To: "R. Emory Lundberg" <firstname.lastname@example.org>
- Subject: Re: weird memory size at le1
- From: email@example.com
- Date: Mon, 18 May 1998 11:42:32 +0100
- Cc: firstname.lastname@example.org
- Delivery-Date: Tue May 19 12:31:56 1998
- References: <Pine.BSF.3.96.980515164326.23151A-100000@bitchslap>
On Fri, May 15, 1998 at 04:44:48PM -0500, R. Emory Lundberg wrote:
> spent the $800 to dump the 10/100 HME card, and put a 10mbit card with a
> scsi adapater on it. la-de-dah.
> now on boot i see:
> le0 at ledma0 slot 0x4 offset 0x8c00000 pri 6: address 08:00:20:80:1b:31
> le0: 8 receive buffers, 2 transmit buffers
> dma1 at sbus0 slot 0 offset 0x81000: rev esc
> esp1 at dma1 slot 0x0 offset 0x80000 pri 5: ESP200, 40MHz, SCSI ID 7
> scsibus1 at esp1: 8 targets
> lebuffer0 at sbus0 slot 0 offset 0x40000
> le1 at lebuffer0 slot 0x0 offset 0x60000 pri 7panic: am7990_config: weird
> memory size
> Stopped at _Debugger: ta %icc, 0x1
> whats "weird memory size" all about? seems like no matter what ethernet
> card i have, its not good enough for OpenBSD/sparc.
I hate to post the usual "me-too" post, but I see exactly the same behaviour
on a friend's SparcServer 670MP. The box in question has 3 of those combined
cards in it, plus another on the mainboard. No joy in booting that box, we
had to go NetBSD...
BTW, I *know* that the MPs are not supported (yet), but that was not what
kept them from booting. The whole idea was to try and make it work on an
MP boxy. Oh well.