PCMCIA and Adaptec 1460 SCSI

[Stefan Schwertheim <openbsd@accomm.de>]

Hello,

I use OpenBSD 2.4 with PCMCIA Adaptec APA-1460 SCSI Host Adapter
and a jaz Drive at tage 0 lun 0. During the booting i get:

>aic0 at pcmcia0 function 0 port 0x340-0x35f
>scsibus0 at aic0: 8 targets
>scsibus0 targ 0 lun 0: <iomega, jaz 1GB, J^77> SCSI2 0/direct removable not configured

but how did i use aic0 ?


Best regards,
Stefan


avail mem = 60006400
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ca) BIOS, date 07/15/96
bios0: pciinfo 0xf035f00c apminfo 0xf035f028 diskinfo 0xf035f050
cksumlen 1 memmap 0xf035f0cc
apm at bios0 function 0x15 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Silicon Integrated System 85C501" rev
0x00
pcib0 at pci0 dev 1 function 0 "Silicon Integrated System 85C503 ISA
Bridge" rev 0x01
"Silicon Integrated System 85C601 EIDE" rev 0x01 at pci0 dev 1 function
1 not configured
"Trident Microsystems TGUI 9660" rev 0xd3 at pci0 dev 6 function 0 not
configured
vendor "Omega Micro", unknown product 0x1221 (class bridge, subclass
PCMCIA, rev 0x02) at pci0 dev 13 function 0 not configured
vendor "Omega Micro", unknown product 0x1221 (class bridge, subclass
PCMCIA, rev 0x02) at pci0 dev 14 function 0 not configured
isa0 at mainbus0
lpt0 at isa0 port 0x378-0x37b irq 7
isadma0 at isa0
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <TOSHIBA MK2103MAV>
wd0: 2067MB, 4200 cyl, 16 head, 63 sec, 512 bytes/sec, 4233600 sec total
wd0: using 16-sector 16-bit pio transfers, lba addressing (128KB cache)
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus1 at wdc1
acd0 at atapibus1 drive 0: <CD-38E, 1.0D> ATAPI 5/cdrom removable
acd0: 1377Kb/sec, 128Kb cache, audio play, 16 volume levels
sb0 at isa0 port 0x220-0x237 irq 7 drq 1: dsp v3.01
audio0 at sb0
npx0 at isa0 port 0xf0-0xff: using exception 16
pccom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60-0x6f irq 1: TVGA 9660, 80/132 col, color, 8 scr,
mf2-kbd
fdc0 at isa0 port 0x3f0-0x3f5 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 5
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: Adaptec, Inc., APA-1460 SCSI Host Adapter, Version
0.01
pcmcia0: Manufacturer code 0x12f, product 0x2
pcmcia0: function 0: unspecified, ccr addr 2000 mask 1
pcmcia0: function 0, config table entry 9: I/O card; irq mask 1e00;
iomask a, iospace 340-35f; rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia0: function 0, config table entry 8: I/O card; irq mask 1e00;
iomask a, iospace 140-15f; rdybsy_active wp_active bvd_active io16
irqlevel
aic0 at pcmcia0 function 0 port 0x340-0x35f
scsibus0 at aic0: 8 targets
scsibus0 targ 0 lun 0: <iomega, jaz 1GB, J^77> SCSI2 0/direct removable
not configured
pcmcia0: card irq 9
pcmcia1 at pcic0 controller 0 socket 1
pcmcia1: CIS version PCMCIA 2.0 or 2.1
pcmcia1: CIS info: 3Com Corporation, 3C589D, TP/BNC LAN Card Ver. 2a,
000002
pcmcia1: Manufacturer code 0x101, product 0x589
pcmcia1: function 0: network adapter, ccr addr 10000 mask 3
pcmcia1: function 0, config table entry 1: I/O card; irq mask ffff;
iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16
irqlevel
pcmcia1: function 0, config table entry 3: I/O card; irq mask ffff;
iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16
irqlevel
ep0 at pcmcia1 function 0 port 0x330-0x33f: 3Com 3c589 10Mbps Ethernet,
address 00:60:97:8d:71:5f, utp/aui/bnc (default utp)
pcmcia1: card irq 11
pcmcia2 at pcic0 controller 1 socket 0
pcmcia3 at pcic0 controller 1 socket 1
pcic1 at isa0 port 0x3e4-0x3e5 iomem 0xd4000-0xd7fff: using irq 3
pcic1: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic1: controller 1 (Intel 82365SL Revision 1) has sockets A and B
pcmcia4 at pcic1 controller 0 socket 0
pcmcia5 at pcic1 controller 0 socket 1
pcmcia6 at pcic1 controller 1 socket 0
pcmcia7 at pcic1 controller 1 socket 1
biomask c2c0 netmask cac0 ttymask caea
root on wd0a
pctr: 586-class performance counters and user-level cycle counter
enabled
dkcsum: wd0 matched BIOS disk 80
rootdev=0x0 rrootdev=0x300 rawdev=0x302