[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
bktr/fxtv makes system unstable?
Anybod else have a problem with their system being extremely unstable when
using fxtv? I frequently have the system lock up or occassionally reset,
typically when I pull down the menus or otherwise obstruct the window.
I'm thinking it's probably an interrupt conflict, but then again everything
but the soundcards is PCI. A dmesg is attached.
(why is it only PC's seem to have these stupid problems, even with a true
plug and play bus like PCI -- maybe it's just my cheapass main board.)
.......................................................................
: "Welcome to NSA's Web Server!" : Trevor Schroeder :
: -- National Security Agency : tschroed@acm.org :
:........... http://www.zweknu.org/ for PGP key and more .............:
OpenBSD 2.5-current (GENERIC) #298: Tue Jun 15 04:07:32 MDT 1999
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 334 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
BIOS mem = 654336 conventional, 133169152 extended
real mem = 133824512
avail mem = 121253888
using 1659 buffers containing 6795264 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(03) BIOS, date 07/10/98
bios0: apminfo 0xf04c100c diskinfo 0xf04c1034 cksumlen 1 memmap 0xf04c10b0
apm0 at bios0: Power Management spec V1.1
apm0: AC on, no battery
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x02
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
"Intel 82371AB IDE (PIIX4)" rev 0x01 at pci0 dev 7 function 1 not configured
"Intel 82371AB USB Host (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 7 function 3 not configured
bktr0 at pci0 dev 9 function 0 "Brooktree BT848" rev 0x12: irq 11
bktr0: buffer size 3555328, addr 0x3000000
bktr: GPIO is 0x00ffffff
STB TV/PCI, Temic NTSC tuner, dbx stereo.
"NVidia/SGS-Thomson Velocity128" rev 0x21 at pci0 dev 11 function 0 not configured
ne3 at pci0 dev 13 function 0 "Winbond Linksys EtherPCI II" rev 0x00: Winbond 89C940F Ethernet
ne3: Ethernet address 00:20:78:15:5c:f9
ne3: irq 5
xl0 at pci0 dev 15 function 0 "3Com 3c905B 100Base-TX" rev 0x00: irq 10 address 00:10:4b:c7:31:f7
xl0: autoneg complete, link status good (full-duplex, 100Mbps)
isa0 at mainbus0
isadma0 at isa0
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <FUJITSU MPC3064AT>
wd0: 6187MB, 13410 cyl, 15 head, 63 sec, 512 bytes/sec, 12672450 sec total
wd0: using 16-sector 16-bit pio transfers, lba addressing
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus1 at wdc1
acd0 at atapibus1 drive 1: <CD-ROM CDU701, 1.0f> ATAPI 5/cdrom removable
acd0: 2412Kb/sec, 128Kb cache, audio play, 256 volume levels
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378-0x37b irq 7
npx0 at isa0 port 0xf0-0xff: using exception 16
pccom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60-0x6f irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0-0x3f5 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
sb1 at isapnp0 <Creative ViBRA16X PnP, CTL0043, , Audio> port 0x220/16,0x300/2,0x388/4 irq 9 drq 0,0: dsp v4.16
midi1 at sb1: <SB MPU-401 UART>
audio0 at sb1
opl0 at sb1: model OPL3
midi2 at opl0: <SB Yamaha OPL3>
joy0 at isapnp0 <Creative ViBRA16X PnP, CTL7005, PNPB02F, Game> port 0x201/1
sb2 at isapnp0 <Creative ViBRA16C PnP, CTL0001, , Audio> port 0x240/16,0x330/2 irq 7 drq 1,5: dsp v4.13
midi3 at sb2: <SB MPU-401 UART>
audio1 at sb2
opl1 at sb2: model OPL3
midi4 at opl1: <SB Yamaha OPL3>
isapnp0: <Creative ViBRA16C PnP, CTL7001, PNPB02F, Game> ignored; resource conflict
biomask cac0 netmask cee0 ttymask dee2
root on wd0a
pctr: 686-class user-level performance counters enabled
dkcsum: wd0 matched BIOS disk 80
rootdev=0x0 rrootdev=0x300 rawdev=0x302
IP Filter: initialized. Default = pass all, Logging = enabled