[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: System hangs - OpenBSD 2.8/Intel
Hi,
Sorry, but i saw this on http://www.openbsd.org/mail.html :-
snip
Please direct 'new user' and installation-related questions to misc
snip
Since i didn't think they were newbie or installation related problems i
posted them here. Anyways, i am using a custom made kernel which includes
GENERIC also :-
Here is MYKERNEL :
----------------------------------------------------------------------------
machine i386 # architecture, used by config; REQUIRED
include "../../../conf/GENERIC"
option I686_CPU
option UVM # use the UVM virtual memory system
option COMPAT_SVR4 # binary compatibility with SVR4
option COMPAT_FREEBSD # binary compatibility with FreeBSD
option COMPAT_BSDOS # binary compatibility with BSD/OS
maxusers 32 # estimated number of users
config bsd swap generic
mainbus0 at root
bios0 at mainbus0
apm0 at bios0
isa0 at mainbus0
isa0 at pcib?
eisa0 at mainbus0
pci* at mainbus0 bus ?
option PCIVERBOSE
option EISAVERBOSE
pchb* at pci? dev ? function ? # PCI-Host bridges
ppb* at pci? dev ? function ? # PCI-PCI bridges
pci* at ppb? bus ?
pci* at pchb? bus ?
pcib* at pci? dev ? function ? # PCI-ISA bridges (do nothing)
puc* at pci? # PCI "universal" communication
device
npx0 at isa? port 0xf0 irq 13 # math coprocessor
isadma0 at isa?
isapnp0 at isa?
vt0 at isa? port 0x60 irq 1
pcppi0 at isa?
sysbeep0 at pcppi?
pccom0 at isa? port 0x3f8 irq 4 # standard PC serial ports
pccom1 at isa? port 0x2f8 irq 3
pccom2 at isa? port 0x3e8 irq 5
pccom* at isapnp?
pccom* at puc? port ?
lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
lpt1 at isa? port 0x278
lpt2 at isa? port 0x3bc
lpt* at puc? port ?
lms0 at isa? port 0x23c irq 5 # Logitech bus mouse
lms1 at isa? port 0x238 irq 5
pms0 at pckbd? irq 12 # PS/2 auxiliary port mouse
fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
fd* at fdc? drive ?
pciide* at pci ? dev ? function ? flags 0x0000
wdc0 at isa? port 0x1f0 irq 14 flags 0x00
wdc1 at isa? port 0x170 irq 15 flags 0x00
wdc* at isapnp?
# IDE hard drives
wd* at wdc? channel ? drive ? flags 0x0000
wd* at pciide? channel ? drive ? flags 0x0000
# ATAPI<->SCSI
atapiscsi* at wdc? channel ?
atapiscsi* at pciide? channel ?
scsibus* at atapiscsi?
ne0 at isa? port 0x240 irq 9 # NE[12]000 ethernet
ne1 at isa? port 0x300 irq 10 # NE[12]000 ethernet
ne2 at isa? port 0x280 irq 9 # NE[12]000 ethernet
ne* at isapnp? # NE[12]000 PnP ethernet
fxp* at pci? dev ? function ? # EtherExpress 10/100B
ethernet
ne* at pci? dev ? function ? # NE2000-compat ethernet
rl* at pci? dev ? function ? # RealTek 81[23]9 ethernet
rlphy* at mii? phy ? # RealTek 8139 internal PHYs
pseudo-device pctr 1
pseudo-device mtrr 1 # Memory range attributes control
pseudo-device sequencer 1
----------------------------------------------------------------------------
----
and here is the dmesg stuff :-
-------------------------------------------------
OpenBSD 2.8 (conf) #0: Fri Jan 2 04:46:06 IST 1998
root@gate:/usr/src/sys/arch/i386/conf
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class, 128KB L2
cache) 568 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,
SIMD
real mem = 132743168 (129632K)
avail mem = 120250368 (117432K)
using 1646 buffers containing 6742016 bytes (6584K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(f7) BIOS, date 05/15/00, BIOS32 rev. 0 @ 0xf06c0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810" rev 0x03: rng active, 10Kb/sec
"Intel 82810 Graphics" rev 0x03 at pci0 dev 1 function 0 not configured
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
rl0 at pci1 dev 8 function 0 "D-Link Systems 538TX" rev 0x10: irq 11 address
00:50:ba:32:8f:08
rlphy0 at rl0 phy 0: RTL internal phy
rl1 at pci1 dev 9 function 0 "D-Link Systems 538TX" rev 0x10: irq 10 address
00:50:ba:33:fc:a6
rlphy1 at rl1 phy 0: RTL internal phy
rl2 at pci1 dev 10 function 0 "D-Link Systems 538TX" rev 0x10: irq 12
address 00:50:ba:8d:a6:52
rlphy2 at rl2 phy 0: RTL internal phy
rl3 at pci1 dev 11 function 0 "Realtek 8139" rev 0x10: irq 5 address
00:50:ba:8b:ad:06
rlphy3 at rl3 phy 0: RTL internal phy
pcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC Interface" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA, channel
0 wired to compatibil
ity, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 0
scsibus0 at atapiscsi0: 2 targets
scsibus0 targ 1 lun 0: <ATAPI-CD, ROM-DRIVE-50MAX, 50MT> SCSI0 5/cdrom
removable not configured
wd0 at pciide0 channel 0 drive 0: <ST310212A>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wd0: 32-sector PIO, LBA, 9768MB, 16383 cyl, 16 head, 63 sec, 20005650
sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
atapiscsi0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
"Intel 82801AA USB" rev 0x02 at pci0 dev 31 function 2 not configured
"Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
"Intel 82801AA AC-97 Audio" rev 0x02 at pci0 dev 31 function 5 not
configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0: irq 12 already in use
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4040 netmask 5c60 ttymask 5ce2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
IP Filter: v3.4.18 initialized. Default = pass all, Logging = enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
arp info overwritten for 202.87.44.4 by 00:02:a5:08:fb:63 on rl3
arp info overwritten for 202.87.44.10 by 00:02:a5:51:27:2c on rl3
----------------------------------------------------------------------------
-----------------
Do tell me if you still think this should goto 'misc'.
Siddhartha
----- Original Message -----
From: "Heikki Korpela" <heko@iki.fi>To: "Sjsnort" <sjsnort@yahoo.com>
Cc: <tech@openbsd.org>
Sent: Monday, July 16, 2001 9:25 PM
Subject: Re: System hangs - OpenBSD 2.8/Intel
> On Mon, 16 Jul 2001, Sjsnort wrote:
>
> > To: tech@openbsd.org
>
> Please use misc@openbsd.org instead.
>
> > I am totally to my wits ends on how to troubleshoot the problem or where
to
> > look for something broken?
>
> Can you give a dmesg? In specific, are you running GENERIC or a custom
> kernel?
>
> > Siddhartha
>
> --
> <---------------------------------------------------------------------->
> Heikki Korpela -- heko@iki.fi -- http://iki.fi/heko/