No interupts for nic and bttv

["Albert Martinez" <albertem@bellatlantic.net>]

What does this mean?  How do I fix it?  Where are the resources?

bktr0 at pci0 dev 10 function 0 "Brooktree BT848" rev 0x12pci_intr_map: no
mapping for pin A
bktr0: couldn't map interrupt
rl0 at pci0 dev 12 function 0 "D-Link Systems 530TX+" rev 0x10pci_intr_map: no
mapping for pin A
: couldn't map interrupt

TIA,
    AL.

DMESG:
OpenBSD 2.9 (GENERIC) #653: Sat Apr 28 13:57:59 MDT 2001
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Duron ("AuthenticAMD" 686-class) 757 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 133722112 (130588K)
avail mem = 119070720 (116280K)
using 1657 buffers containing 6787072 bytes (6628K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(23) BIOS, date 03/07/01, BIOS32 rev. 0 @ 0xf0ee0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x1742
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf1690/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C586 PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8363 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "VIA VT8363 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "VIA VT82C686A PCI-ISA" rev 0x40
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC AC26400B>
wd0: 16-sector PIO, LBA, 6149MB, 13328 cyl, 15 head, 63 sec, 12594960 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <E-IDE, CD-ROM 40X/AKU, U31> SCSI0 5/cdrom
removable
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x16: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x16: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 7 function 4 "VIA VT82C686A SMBus" rev 0x40
bktr0 at pci0 dev 10 function 0 "Brooktree BT848" rev 0x12pci_intr_map: no
mapping for pin A
bktr0: couldn't map interrupt
rl0 at pci0 dev 12 function 0 "D-Link Systems 530TX+" rev 0x10pci_intr_map: no
mapping for pin A
: couldn't map interrupt
vga1 at pci0 dev 13 function 0 "3DFX Interactive Voodoo3" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c440 netmask c440 ttymask d4c2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302