pbs on openbsd 3.0 & 3.1 on atapi cdrom ...

[fde <fde@mgn.net>]

Hello,

An error on boot : (dmesg)

wdc_atapi_intr: warning: reading only 32 of 36 bytes
probe(atapiscsi0:0:0): Sense Error Code 5

does not read cdrom

on openbsd 3.x

whereas that functions with openbsd2.9 ...

the same pbs have floppy31.fs floppy31B.fs flopp31C.fs ...

Best Regards.


dmesg :
OpenBSD 3.1 (RAMDISKC) #231: Sat Apr 13 15:50:27 MDT 2002
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISKC
cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 2.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 536457216 (523884K)
avail mem = 493629440 (482060K)
using 5689 buffers containing 26927104 bytes (26296K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(4b) BIOS, date 04/02/02, BIOS32 rev. 0 @
0xfb330
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfde90/240 (13 entries)
pcibios0: PCI Exclusive IRQs: 5 7 10 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB PCI-ISA" rev
0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
pci2 at ppb1 bus 2
fxp0 at pci2 dev 6 function 0 "Intel 82557" rev 0x08: irq 10, address
00:30:48:51:1b:15
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
fxp1 at pci2 dev 7 function 0 "Intel 82557" rev 0x08: irq 11, address
00:30:48:51:1b:13
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
vga1 at pci2 dev 8 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA,
channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <MAXTOR 6L020J1>
wd0: 16-sector PIO, LBA, 19595MB, 16383 cyl, 16 head, 63 sec, 40132503
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
wdc_atapi_intr: warning: reading only 32 of 36 bytes
probe(atapiscsi0:0:0): Sense Error Code 5
atapiscsi0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801BA SMBus" rev 0x05 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask cc40 ttymask cc42
rd0: fixed, 3560 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02