[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: OpenSSH update on OpenBSD 3.1

To: Markus Friedl <markus@openbsd.org>
Subject: Re: OpenSSH update on OpenBSD 3.1
From: Chris Hedemark <chris@yonderway.com>
Date: 28 Aug 2002 21:50:31 -0400
Cc: bugs@openbsd.org, tech@openbsd.org
References: <A5A638D8-BAB8-11D6-B5F7-0003939CC61E@yonderway.com> <20020828194204.GA6948@faui02>

Hi Markus,

Thanks for taking a look at this.  I downloaded the patch tree from CVS,
and I did indeed do the SSL upgrade first.

Would you suggest a course of action for getting OpenSSH into a secure
version?

Thanks,
Chris

On Wed, 2002-08-28 at 15:42, Markus Friedl wrote:
> this looks like a OpenSSL header/library mismatch.
> 
> your includes are from 3.1 and the libcrypto is from -current.
> 
> On Wed, Aug 28, 2002 at 03:02:06PM -0400, Christian J Hedemark wrote:
> > I'm trying to upgrade OpenSSH following the directions on the web site 
> > and when I get to "make" I end up with the following errors:
> > 
> > -----
> > 
> > cc   -o ssh ssh.o readconf.o clientloop.o sshtty.o sshconnect.o 
> > sshconnect1.o sshconnect2.o -lkrb5 -lasn1 -lcom_err -lkrb -lkafs 
> > -L/usr/src/usr.bin/ssh/ssh/../lib/obj -lssh -lcrypto -lz -ldes
> > rsa.o: Undefined symbol `_BN_mod' referenced from text segment
> > rsa.o: Undefined symbol `_BN_mod' referenced from text segment
> > mac.o: Undefined symbol `_HMAC_cleanup' referenced from text segment
> > collect2: ld returned 1 exit status
> > *** Error code 1
> > 
> > Stop in /usr/src/usr.bin/ssh/ssh (line 101 of 
> > /usr/share/mk/bsd.prog.mk).
> > *** Error code 1
> > 
> > Stop in /usr/src/usr.bin/ssh.
> > 
> > -----
> > 
> > Here is my dmesg:
> > 
> > -----
> > OpenBSD 3.1-stable (GENERIC) #0: Wed Aug 28 10:53:00 GMT 2002
> >     root@sulu:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: Intel Pentium II (Klamath) ("GenuineIntel" 686-class, 512KB L2 
> > cache) 266 MHz
> > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,MMX
> > real mem  = 133804032 (130668K)
> > avail mem = 118435840 (115660K)
> > using 1658 buffers containing 6791168 bytes (6632K) of memory
> > mainbus0 (root)
> > bios0 at mainbus0: AT/286+(74) BIOS, date 02/04/98, BIOS32 rev. 0 @ 
> > 0xed000
> > pcibios0 at bios0: rev. 2.1 @ 0xed000/0x3000
> > pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf6d30/160 (8 entries)
> > pcibios0: PCI Interrupt Router at 000:20:0 ("Intel 82371AB PIIX4 ISA" 
> > rev 0x00)
> > pcibios0: PCI bus #3 is the last bus
> > bios0: ROM list: 0xc0000/0x8000
> > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82443LX PCI-AGP" rev 0x03
> > ppb0 at pci0 dev 1 function 0 "Intel 82443LX AGP" rev 0x03
> > pci1 at ppb0 bus 1
> > ppb1 at pci0 dev 13 function 0 "DEC 21152 PCI-PCI" rev 0x03
> > pci2 at ppb1 bus 2
> > dc0 at pci2 dev 4 function 0 "DEC 21142/3" rev 0x41: irq 11 address 
> > 00:80:c8:b9:74:91
> > nsphyter0 at dc0 phy 1: DP83843 10/100 media interface, rev. 0
> > dc1 at pci2 dev 5 function 0 "DEC 21142/3" rev 0x41: irq 11 address 
> > 00:80:c8:b9:74:92
> > dcphy0 at dc1 phy 31: internal PHY
> > dc2 at pci2 dev 6 function 0 "DEC 21142/3" rev 0x41: irq 11 address 
> > 00:80:c8:b9:74:93
> > nsphyter1 at dc2 phy 1: DP83843 10/100 media interface, rev. 0
> > dc3 at pci2 dev 7 function 0 "DEC 21142/3" rev 0x41: irq 11 address 
> > 00:80:c8:b9:74:94
> > nsphyter2 at dc3 phy 1: DP83843 10/100 media interface, rev. 0
> > vga1 at pci0 dev 14 function 0 "Matrox MGA 1064SG 220MHz" rev 0x03
> > wsdisplay0 at vga1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > tl0 at pci0 dev 16 function 0 "Compaq Embedded Netelligent 10/100 TX" 
> > rev 0x10: irq 11 address 00:08:c7:fc:72:20
> > lxtphy0 at tl0 phy 1: LXT970 10/100 media interface, rev. 0
> > ukphy0 at tl0 phy 31: Generic IEEE 802.3u media interface
> > ukphy0: OUI 0x100014, model 0x0001, rev. 6
> > ppb2 at pci0 dev 18 function 0 "DEC 21152 PCI-PCI" rev 0x03
> > pci3 at ppb2 bus 3
> > dc4 at pci3 dev 4 function 0 "DEC 21142/3" rev 0x41: irq 11 address 
> > 00:80:c8:b9:74:59
> > nsphyter3 at dc4 phy 1: DP83843 10/100 media interface, rev. 0
> > dc5 at pci3 dev 5 function 0 "DEC 21142/3" rev 0x41: irq 11 address 
> > 00:80:c8:b9:74:5a
> > nsphyter4 at dc5 phy 1: DP83843 10/100 media interface, rev. 0
> > dc6 at pci3 dev 6 function 0 "DEC 21142/3" rev 0x41: irq 11 address 
> > 00:80:c8:b9:74:5b
> > nsphyter5 at dc6 phy 1: DP83843 10/100 media interface, rev. 0
> > dc7 at pci3 dev 7 function 0 "DEC 21142/3" rev 0x41: irq 11 address 
> > 00:80:c8:b9:74:5c
> > nsphyter6 at dc7 phy 1: DP83843 10/100 media interface, rev. 0
> > pcib0 at pci0 dev 20 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
> > pciide0 at pci0 dev 20 function 1 "Intel 82371AB IDE" rev 0x01: DMA, 
> > channel 0 wired to compatibility, channel 1 wired to compatibility
> > wd0 at pciide0 channel 0 drive 0: <Maxtor 83240D3>
> > wd0: 16-sector PIO, LBA, 3090MB, 6697 cyl, 15 head, 63 sec, 6329388 
> > sectors
> > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> > atapiscsi0 at pciide0 channel 1 drive 0
> > scsibus0 at atapiscsi0: 2 targets
> > cd0 at scsibus0 targ 0 lun 0: <COMPAQ, CRD-8241B, 1.14> SCSI0 5/cdrom 
> > removable
> > cd0(pciide0:1:0): using PIO mode 4
> > uhci0 at pci0 dev 20 function 2 "Intel 82371AB USB" rev 0x01: irq 11
> > usb0 at uhci0: USB revision 1.0
> > uhub0 at usb0
> > uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > uhub0: 2 ports with 2 removable, self powered
> > "Intel 82371AB Power Mgmt" rev 0x01 at pci0 dev 20 function 3 not 
> > configured
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pms0 mux 0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > sysbeep0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > npx0 at isa0 port 0xf0/16: using exception 16
> > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > isapnp0 at isa0 port 0x279: read port 0x203
> > "ESS ES1869 Plug and Play AudioD, ESS0006, , " at isapnp0 port 0x800/8 
> > not configured
> > ess0 at isapnp0 "ESS ES1869 Plug and Play AudioD, ESS1869, , " port 
> > 0x220/16,0x388/4,0x330/2 irq 5 drq 1,0: ESS Technology ES1869 [version 
> > 0x688b]
> > ess0: audio1 interrupting at irq 5
> > audio0 at ess0
> > opl0 at ess0: model OPL3
> > midi1 at opl0: <ESS Yamaha OPL3>
> > biomask c840 netmask c840 ttymask d8c2
> > pctr: 686-class user-level performance counters enabled
> > mtrr: Pentium Pro MTRR support
> > dkcsum: wd0 matched BIOS disk 80
> > root on wd0a
> > rootdev=0x0 rrootdev=0x300 rawdev=0x302
> > uhid0 at uhub0 port 1 configuration 1 interface 0
> > uhid0: American Power Conversion Back-UPS LS 700 FW:19.b2 .D USB FW:b2, 
> > rev 1.10/1.06, addr 2, iclass 3/0
> > in6_ifattach: tun1 is not multicast capable, IPv6 not enabled
> > in6_ifattach: tun1 is not multicast capable, IPv6 not enabled
> > 
> > -----
-- 
Chris Hedemark
Yonder Way Productions - Professional Videography
Hillsborough, NC
 *** AUGUST SPECIAL --- $500 WEDDING VIDEOS!!!
http://yonderway.com/video ***

Follow-Ups:
- Re: OpenSSH update on OpenBSD 3.1
  - From: Markus Friedl <markus@openbsd.org>

References:
- OpenSSH update on OpenBSD 3.1
  - From: Christian J Hedemark <chris@yonderway.com>
- Re: OpenSSH update on OpenBSD 3.1
  - From: Markus Friedl <markus@openbsd.org>

Prev by Date: Re: spurious wd1 detect on soekris net4521
Next by Date: Re: FYI: monitoring OpenBSD
Prev by thread: Re: OpenSSH update on OpenBSD 3.1
Next by thread: Re: OpenSSH update on OpenBSD 3.1
Index(es):
- Date
- Thread