[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: twe driver?
You should be able to do it from the 3ware console in the firmware.
Not elegant (have to bring system down), but whatever gets the job
done I suppose.
It *should* auto rebuild in background if set to do so in the bios.
Rumor has it that L. V. Lammert (firstname.lastname@example.org) said:
> I have a Escallade 6410 configured as RAID 5 with 4x40 drives. One of the
> drives died, so I replaced it. Reconfigured the array in BIOS, no problem.
> The problem IS that the twe driver apparently is not 'seeing' the 'ready
> for rebuild status'! Tried 3Ware support - they suggested upgrading the
> 6410 BIOS. No Joy.
> I know 3Ware has been flakey in support, .. but does anyone have a way to
> get the twe driver to rebuild the array (if I understand the linkage
> between the BIOS and driver correctly)?
> Leland V. Lammert email@example.com
> Chief Scientist Omnitec Corporation
> Network/Internet Consultants www.omnitec.net
John W. Eisenschmidt (firstname.lastname@example.org)
[demime 0.98d removed an attachment of type application/pgp-signature]