Re: IMPORTANT: need isadmaattach panic victim to test ASAP!

[David Terrell <dbt@meat.net>]

On Fri, Oct 08, 1999 at 06:04:32AM -0700, David Terrell wrote:
> Patch doesn't fix.  Removing RAM down to 128M does.  I've attached
> dmesg output in case that helps (from a successful boot).

er, now I have.

OpenBSD 2.6-beta (PIANOSA) #1: Fri Oct  8 05:22:08 PDT 1999
    dbt@luciana:/usr/src/sys/arch/i386/compile/PIANOSA
cpu0: AMD K6 ("AuthenticAMD" 586-class) 234 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
BIOS mem  = 654336 conventional, 133169152 extended
real mem  = 133824512
avail mem = 120664064
using 1659 buffers containing 6795264 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(cf) BIOS, date 10/08/97
bios0: diskinfo 0xe054f00c cksumlen 1 memmap 0xe054f0c8 pciinfo 0xe054f14c apminfo 0xe054f168
apm0 at bios0: Power Management spec V1.1
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, no battery
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C1595 (Apollo VP2) Host-PCI" rev 0x06
pcib0 at pci0 dev 7 function 0 "VIA VT82C586 (Apollo VP) PCI-ISA" rev 0x27
pciide0 at pci0 dev 7 function 1 "VIA VT82C586A IDE" rev 0x06: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DHEA-38451>
wd0: 16-sector PIO, LBA, 8063MB, 16383 cyl, 16 head, 63 sec, 16514064 sectors
wd0: 32-bit, supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
ncr0 at pci0 dev 9 function 0 "Symbios Logic 53c875" rev 0x03: ncr 53c875 fast20 wide scsi, irq 11
scsibus0 at ncr0: 16 targets
sd0 at scsibus0 targ 1 lun 0: <IBM, DDRS-34560W, S97B> SCSI2 0/direct fixed
sd0: sd0(ncr0:1:0): WIDE SCSI (16 bit) enabled
sd0(ncr0:1:0): 40.0 MB/s (50 ns, offset 15)
4357MB, 8387 cyl, 5 head, 212 sec, 512 bytes/sec, 8925000 sec total
cd0 at scsibus0 targ 3 lun 0: <PLEXTOR, CD-ROM PX-32TS, 1.01> SCSI2 5/cdrom removable
probe(ncr0:3:1): 20.0 MB/s (50 ns, offset 15)
st0 at scsibus0 targ 4 lun 0: <EXABYTE, EXB-8200, 425A> SCSI1 1/sequential removable
st0: drive empty
sd1 at scsibus0 targ 5 lun 0: <IBM, DDRS-34560W, S97B> SCSI2 0/direct fixed
sd1: sd1(ncr0:5:0): WIDE SCSI (16 bit) enabled
sd1(ncr0:5:0): 40.0 MB/s (50 ns, offset 15)
4357MB, 8387 cyl, 5 head, 212 sec, 512 bytes/sec, 8925000 sec total
ne3 at pci0 dev 11 function 0 "Realtek 8029" rev 0x00 irq 9
ne3: address 00:c0:0c:b0:ae:6a
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4840 netmask 4a40 ttymask 5ac2
pctr: user-level cycle counter enabled
wd0: no disk label
dkcsum: wd0 matched BIOS disk 82
dkcsum: sd0 matched BIOS disk 80
dkcsum: sd1 matched BIOS disk 81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
/dev/wd0i: file system not clean; please fsck(8)
IP Filter: initialized.  Default = pass all, Logging = enabled