Re: *Now* is the time to test snapshots.

[Kim Kyung-Hwan <redjade@atropos.snu.ac.kr>]

Clean install, but got a ldconfig failure after extraction.
dmesg included.

Thanks.

KyungHwan Kim

dmesg-->>>
OpenBSD 2.6-beta (GENERIC) #660: Wed Oct  6 23:33:25 MDT 1999
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 351 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXS
R
BIOS mem  = 654336 conventional, 267321344 extended
real mem  = 267976704
avail mem = 245891072
using 3296 buffers containing 13500416 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(34) BIOS, date 10/20/98
bios0: diskinfo 0xe055800c cksumlen 1 memmap 0xe0558088 apminfo 0xe0558134
apm0 at bios0: Power Management spec V1.1
apm0: AC on, no battery
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x03
pci1 at ppb0 bus 1
"Texas Instruments 3DLabs Permedia 2" rev 0x01 at pci1 dev 0 function 0 not conf
igured
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: DMA, chan
nel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL EX10.2A>
wd0: 16-sector PIO, LBA, 9787MB, 16383 cyl, 16 head, 63 sec, 20044080 sectors
wd0: 32-bit, supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
atapiscsi0 at pciide0 channel 1
atapiscsi0: 32-bit, supports PIO mode 4, DMA mode 2
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRD-8400B, 1.01> SCSI0 5/cdrom removab
le
pciide0: channel 1 interrupting at irq 15
atapiscsi0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 7 function 3 not c
onfigured
eap0 at pci0 dev 14 function 0 "Ensoniq AudioPCI" rev 0x01: eap0
audio0 at eap0
xl0 at pci0 dev 18 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 5 address 0
0:10:5a:13:07:81
exphy0 at xl0 phy 24: 3Com internal media interface
xl0: guessing 10/100 internal
XCVR: 8, MEDIA: 2
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask c060 ttymask d0e2
pctr: 686-class user-level performance counters enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302