2.6 Oct 7 snapshot (i386) working on Dell Latitude CS

[Jeremie Kass <jeremie@umich.edu>]

Got 2.6-beta running on my laptop, a Dell Latitude CS

I am not having any luck getting X working, it's a NeoMagic 2360 256-bit
graphics accelerator with 4MB internal video memory. 

Dmesg follows:

OpenBSD 2.6-beta (GENERIC) #660: Wed Oct  6 23:33:25 MDT 1999
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II (Celeron) ("GenuineIntel" 686-class, 256KB L2 cache) 397 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
BIOS mem  = 654336 conventional, 133103616 extended
real mem  = 133758976
avail mem = 120569856
using 1658 buffers containing 6791168 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/20/99
bios0: diskinfo 0xe055800c cksumlen 1 memmap 0xe0558088 apminfo 0xe0558134
apm0 at bios0: Power Management spec V1.1
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, estimated 4:49 minutes
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x03
pci1 at ppb0 bus 1
vendor "Neomagic", unknown product 0x6 (class display, subclass VGA, rev 0x00) at pci1 dev 0 function 0 not configured
vendor "Neomagic", unknown product 0x8006 (class multimedia, subclass audio, rev 0x00) at pci1 dev 0 function 1 not configured
"Texas Instruments PCI1225 PCI-CardBus" rev 0x01 at pci0 dev 3 function 0 not configured
"Texas Instruments PCI1225 PCI-CardBus" rev 0x01 at pci0 dev 3 function 1 not configured
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DBCA-206480>
wd0: 16-sector PIO, LBA, 6194MB, 13424 cyl, 15 head, 63 sec, 12685680 sectors
wd0: 32-bit, supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: channel 1 ignored (disabled)
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x03 at pci0 dev 7 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
pcic0 controller 0: <Intel 82365SL rev 2> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
ne3 at pcmcia0 function 0 "Dayna Communications, Inc., CommuniCard E, " port 0x340/16 irq 3
ne3: address 00:80:19:2d:7e:13
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 9
biomask 4040 netmask 4048 ttymask 52ca
pctr: 686-class user-level performance counters enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302