Re: xl driver messages

[jlwright@uncg.edu (Jason L. Wright)]

Chris Cappuccio <chris@dqc.org> writes:

> On Thu, 21 Oct 1999, Ian Darwin wrote:
> | xl0 at pci0 dev 14 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 9 address 00:60:97:93:5f:29
> | OUI 0x080017 model 0x0000 rev 1 at xl0 phy 24 not configured
> | xl1 at pci0 dev 16 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 10 address  00:60:97:58:45:1b
> | OUI 0x080017 model 0x0000 rev 0 at xl1 phy 24 not configured
> |
...
> |
> | xl0: transmission error: 90
> | xl0: tx underrun, increasing tx start threshold to 120
> | xl1: transmission error: 90
> | xl1: tx underrun, increasing tx start threshold to 120
> |

> It appears to be less of an error then a diagnostic message.
> 
It is purely diagnostic and should be removed.  I will do that
after the thaw.

Btw, that's an nsphy, NOT an exphy (see /sys/dev/mii/miidevs).

--Jason Wright