INSTALL.mac68K documentation error (3.4)

[Michael <openbsd_(_at_)_magicpubs_(_dot_)_com>]

The document "INSTALL.mac68K" (3.4) states:

> Some systems will boot and are usable from an external terminal
> (serial tty or SL/IP):
> 	LC475, Performa 475, Quadra 605, Quadra 950
> 	possibly others

However the LC475, Performa 475 and Quadra 605 (all essentially the 
same machine) appear to be "fully" supported.  At least the SCSI 
controller, ADB and video display all work.  These machines, therefore, 
should be listed as "fully" supported.  I am NOT using an external 
terminal via serial tty nor SLIP (i don't even know if the computer's 
serial port is functional).  All i'm using is the keyboard and monitor 
(and internal SCSI drive); here's the dmesg:

OpenBSD 3.4 (GENERIC) #3: Tue Sep 16 20:55:13 MDT 2003
    root_(_at_)_q650_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/mac68k/compile/GENERIC
Apple Macintosh LC 475, 68040 CPU+MMU+FPU, 4k on-chip physical I/D 
caches
real mem = 20971520 (20480K)
avail mem = 15753216 (15384K)
using 281 buffers containing 1150976 bytes (1124K) of memory
mrg: 'Quadra/Centris 605 ROMs' ROM glue, tracing off, debug off, silent 
traps
mrg: I/O map kludge for ROMs that use hardware addresses directly.
adb: bus subsystem
mrg: skipping egret setup
adb: calling ADBReInit
adb: using Cuda series hardware support
adb: cleanup: nothing returned
adb: ADBReInit complete
adb: keyboard at 2
adb: 100 dpi mouse at 3
mainbus0 (root)
obio0 at mainbus0
adb0 at obio0 (ADB event device)
asc0 at obio0: Apple Sound Chip
intvid0 at obio0: DAFB: Monitor sense 1.
intvid0: 640 x 480, monochrome
grf0 at intvid0
ite0 at grf0 (minimal console)
esp0 at obio0: address 0x898000: NCR53C96, 16MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 0 lun 0: <IBM, DCHS04F, 2424> SCSI2 0/direct fixed
sd0: 4334MB, 6077 cyl, 9 head, 162 sec, 512 bytes/sec, 8877052 sec total
zsc0 at obio0 chip type 0
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
nubus0 at mainbus0
ae0 at nubus0: address 00:00:94:68:68:3c, type MacCon LC - A , 32KB 
memory
root on sd0a swap on sd0b
PRAM time does not appear to have been read correctly.
PRAM: 0x83da4f80, macos_boottime: 0x3fb6baee.

_____________________________________________________________

  It is error alone which needs the support of government.
  Truth can stand by itself.
                                  -- Thomas Jefferson
_____________________________________________________________