APM

[Christian Morris <xian_(_at_)_smoke_(_dot_)_crack_(_dot_)_net>]

Am I missing something very obvious, is there some "trick" to getting apm
support working on i386 boxes, or is this broken, and in any of those
cases, how can I as a non-coder help get this functional?  I've had
various snapshot kernels that DID have functional apm support, and the
apm test floppy put out pre-2.5 worked well on my box, but so far, none of
the release versions have.  I've also cvs-up'd as of yesterday, and no
joy.  The box in question is a P2 system using an intel se440bx (seattle)
motherboard.  Dmesg follows, kernel compiled with most of the things I
don't need or have stripped away, and APM_DEBUG added.  Any help would be
greatly appreciated!

OpenBSD 2.5-current (FOO) #3: Tue Jun 15 22:26:37 CDT 1999
    xian_(_at_)_foo:/usr/src/sys/arch/i386/compile/FOO
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 398 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
BIOS mem  = 653312 conventional, 166715392 extended
real mem  = 167370752
avail mem = 153804800
using 2068 buffers containing 8470528 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(19) BIOS, date 10/05/98
bios0: apminfo 0xf036000c diskinfo 0xf0360034 cksumlen 1 memmap 0xf03600d0
apminfo: 30102, code f0000/f0000[10000], data 400[10000], entry 5685
apm0: can't map data
apm at bios0 function 0x15 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x02
pci1 at ppb0 bus 1
vendor "Nvidia", unknown product 0x29 (class display, subclass VGA, rev 0x11) at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
"Intel 82371AB IDE (PIIX4)" rev 0x01 at pci0 dev 7 function 1 not configured
"Intel 82371AB USB Host (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 7 function 3 not configured
"Creative Labs SoundBlaster Live" rev 0x05 at pci0 dev 14 function 0 not configured
"Creative Labs SoundBlaster Digital Input" rev 0x05 at pci0 dev 14 function 1 not configured
isa0 at mainbus0
isadma0 at isa0
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
acd0 at atapibus0 drive 1: <BCD-40XH CD-ROM, MT1102  Firmware, VER 1.6> ATAPI 5/cdrom removable
wd0 at wdc0 drive 0: <Maxtor 88400D8>
wd0: 8011MB, 16278 cyl, 16 head, 63 sec, 512 bytes/sec, 16408224 sec total
wd0: using 16-sector 16-bit pio transfers, lba addressing (256KB cache)
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus1 at wdc1
acd1 at atapibus1 drive 1: <SAF  CD-RW4224A, 1.20> ATAPI 5/cdrom removable
acd1(wdc1:1): not ready, command: 5a  0 2a  0  0  0  0  0 1c  0  0  0
acd1: can't MODE SENSE: acd_get_mode failed
wd1 at wdc1 drive 0: <QUANTUM FIREBALL SE3.2A>
wd1: 3079MB, 6256 cyl, 16 head, 63 sec, 512 bytes/sec, 6306048 sec total
wd1: using 16-sector 16-bit pio transfers, lba addressing (80KB cache)
ep0 at isa0 port 0x300-0x30f irq 11: address 00:60:97:72:c8:04, utp/aui/bnc (default utp)
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
pccom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60-0x6f irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0-0x3f5 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask c840 ttymask d842
root on wd0a
pctr: 686-class user-level performance counters enabled
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
rootdev=0x0 rrootdev=0x300 rawdev=0x302