Re: can't reach nameservers

[Ross Alexander <RossAlexander_(_at_)_Home_(_dot_)_com>]

I can ping your nameserver (24.5.156.15) from my @home connecttion, but not your gateway (24.11.202.1). 
Perhaps @home is having a problem.

On Wed, Oct 04, 2000 at 12:40:15AM -0700, Victor Richardson wrote
> Here's that netstat table, cleaned up.
> 
> > # netstat -rn -f inet
> >   Internet:
> >   Destination        Gateway      Flags    Refs    Use    Mtu   Interface
> >   default            24.11.202.1  UGS       0       0     1500  ne3
> >   24/8               link#2       UC        0       0     1500  ne3
> >   24.11.202.1        link#2       UHL       0       0     1500  ne3
> >   24.11.202.27       127.0.0.1    UGHS      0       0     32972 lo0
> >   127/8              127.0.0.1    UGRS      0       0     32972 lo0
> >   127.0.0.1          127.0.0.1    UH        0       0     32972 lo0
> >   192.168.1/24       link#1       UC        0       0     1500  ep0
> >   224/4              127.0.0.1    URS       0       0     32972 lo0
> >
> Victor Richardson wrote:
> 
> > I shutdown my 2.7 firewall and moved it 3 feet, now I can't reach my
> > @home nameserver (24.5.156.15), although I can ping my gateway
> > (24.11.202.1).  NIC ne3 (24.11.202.27) connects to the @home network,
> > ep0 connects to my LAN 192.168.1.0. All the network files like /hosts,
> > /myname, /mygate(24.11.202.1), and /hostname.ne3 & ep0 are configured
> > according to the OpenSBD FAQ. And, everything worked smoothly before I
> > shut it down.
> >
> > I noticed that ne3 does not configure at boot or after 'sh
> > /etc/netstart', and I have to 'ifconfig' it's address in.
> >
> > 'ifconfig -a' shows both interfaces UP and RUNNING. When I run 'route
> > show', it  hangs w/ no response. 'netstat -rn' produces a print out too
> > large to fit on my screen so I use;
> >
> > # netstat -rn -f inet
> > Internet:
> > Destination                Gateway            Flags    Refs    Use
> > Mtu            Interface
> > default                       24.11.202.1       UGS       0
> > 0       1500          ne3
> > 24/8                           link#2                UC
> > 0         0       1500          ne3
> > 24.11.202.1               link#2                UHL       0
> > 0       1500          ne3
> > 24.11.202.27             127.0.0.1           UGHS    0         0
> > 32972        lo0
> > 127/8                         127.0.0.1           UGRS    0
> > 0       32972        lo0
> > 127.0.0.1                   127.0.0.1           UH         0
> > 0       32972        lo0
> > 192.168.1/24             link#1                UC         0
> > 0       1500          ep0
> > 224/4                         127.0.0.1           URS       0
> > 0       32972        lo0
> >
> > Any suggestions about what is wrong? Or any hints what I can do to
> > figure it out?
> >
> > Thanks,
> >
> > Victor

-- 
Ross Alexander
RossAlexander_(_at_)_Home_(_dot_)_com