[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Problem w/ "rd0" and Adaptec 1522B
- To: misc_(_at_)_openbsd_(_dot_)_org
- Subject: Problem w/ "rd0" and Adaptec 1522B
- From: Matthew Cerha <mcerha_(_at_)_io_(_dot_)_com>
- Date: Sun, 22 Oct 2000 12:21:50 -0500 (CDT)
I'm attempting to install 2.7 on a system with an ISA Adaptec 1522B SCSI
controller. This controller has a bootable BIOS. The problem is that
during the boot process the system hangs on the line "rd0: fixed, 3560
blocks". I'm guessing it is trying to setup a ramdisk. The system has 64MB
of RAM. I know it's the aic0 driver causing problems, because if I disable
the driver at boot the system gets past the rd0 problem. Any suggestions?
Matthew Cerha | "*If*, is the word in the middle of *life*."
mcerha AT io.com | --Apocalypse Now
Visit your host, monkey.org