Re: testing for 2.8

[Alf Breull <puma_(_at_)_hannover_(_dot_)_sgh-net_(_dot_)_de>]

I'm sorry to say:
I didn't succeed to install (floppy28.fs), 2.8 messages follow (hand
copied, sorry (newbie), 
for additional information, dmesg from OpenBSD 2.7 follows below.

Alf

---- floppy28.fs (from today/ Frankfurt, Germany, ftp giga) ---
reading boot .......
probing: pc0 com0 com1 apm mem[639K 31M a20=on]
disk: fd0 hd0
>> OpenBSD/i386 BOOT 1.25
open(fd0a:/etc/boot.con): Input/output error
boot>
booting fd0a:/bsd: failed(5). will try /obsd
boot>
booting fd0a:/obsd: failed(5). will try /bsd.old
boot>
booting fd0a:/bsd.old: failed(5). will try /bsd
boot>
... 
ctrl-c

---- dmesg from v 2.7 -------------
OpenBSD 2.7 (GENERIC) #25: Sat May 13 18:04:26 MDT 2000

deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: F00F
bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel"
586-class) 200 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem  =
33140736 (32364K)
avail mem = 26136576 (25524K)
using 430 buffers
containing 1761280 bytes (1720K) of memory
mainbus0 (root)
bios0 at
mainbus0: AT/286+(95) BIOS, date 08/28/97
apm0 at bios0: Power Management
spec V1.2
apm0: AC on, battery charge unknown
pci0 at mainbus0 bus 0:
configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82439TX
System (MTXC)" rev 0x01
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4
ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE (PIIX4)"
rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to
compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 7850 AV>
wd0: can
use 32-bit, PIO mode 3, DMA mode 0
wd0: 8-sector PIO, LBA, 814MB, 1654 cyl,
16 head, 63 sec, 1667232 sectors
pciide0: channel 0 interrupting at irq
14
wd0(pciide0:0:0): using PIO mode 0, DMA mode 0 (using DMA data
transfers)
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2
targets
cd0 at scsibus0 targ 1 lun 0: <TOSHIBA, CD-ROM XM-6302B, 1012>
SCSI0 5/cdrom removable
cd0: can use 32-bit, PIO mode 4, DMA mode
2
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:1): using PIO
mode 4, DMA mode 2 (using DMA data transfers)
"Intel 82371AB USB (PIIX4)"
rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power
Management (PIIX4)" rev 0x01 at pci0 dev 7 function 3 not configured
ne3 at
pci0 dev 15 function 0 "Realtek 8029" rev 0x00: irq 9
ne3: address
00:a0:4b:03:60:03
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port
0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port
0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0
port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq
3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80/132 col,
color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6
drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040
netmask c240 ttymask d2c2
pctr: 586-class performance counters and
user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on
wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302