Watchdog timeout on 2.8, vr0

[Oliver Artelt <oli_(_at_)_md_(_dot_)_transnet_(_dot_)_de>]

HI all,
the machine has three D-Link DFE-530TX cards and are correctly recognised at 
boot time:


vr0 at pci0 dev 10 function 0 "VIA RhineII-2" rev 0x42: irq 12 address 
00:50:ba:f0:6e:9e
vr0: autoneg complete, link status good (half-duplex, 10Mbps)
vr1 at pci0 dev 11 function 0 "VIA RhineII-2" rev 0x42: irq 10 address 
00:50:ba:f0:4e:8f
vr1: autoneg complete, link status good (half-duplex, 100Mbps)
vr2 at pci0 dev 12 function 0 "VIA RhineII-2" rev 0x42: irq 11 address 
00:50:ba:f0:9f:2a
vr2: autoneg complete, link status good (half-duplex, 100Mbps)                
...
pms0: irq 12 already in use
...
                                                              
But timeouts arising -and only vr0- after that:

vr0: watchdog timeout
vr0: watchdog timeout
vr0: watchdog timeout


I've searched in the (unfortunately only 2.7) sources (sys/dev/pci/if_vr.c) 
and there arises this error if an autonegflag isn't true. Or is the conflict 
on irq12 be the fault? What is pms0? mouse? I don't need such things. Can 
someone help please?


thnx, oli.
---

Oliver Artelt, System- und Datenbankadministration
---------------------------------------------------------------
  cubeoffice GmbH & Co.KG # jordanstrasse 7 # 39112 magdeburg
telefon: +49 (0)391 6 11 28 10 # telefax: +49 (0)391 6 11 28 19
   email: oli_(_at_)_cubeoffice_(_dot_)_de # web: http://www.cubeoffice.de
---------------------------------------------------------------