Re: pcmcia not working (openbsd 3.2)

[Sebastian Benoit <benoit-lists_(_at_)_fb12_(_dot_)_de>]

Sebastian Benoit(benoit-lists_(_at_)_fb12_(_dot_)_de)@2003.04.12 19:25:57 +0000:
> Hi,
> 
> i installed 3.2 on an old laptop and now cannot get the pcmcia-bus to work.
> I have read pcmcia(4) and tested different config-values, but no luck so
> far. pcmcia worked with win95/linux before, so i don't think it's broken.
> Also I cant say what chipset the notebook uses, it's pentium-133 vintage
> no-name crap.
> 
> any ideas?

Tom Cosgrove reminded me to post a dmesg output:

OpenBSD 3.2 (GENERIC) #25: Thu Oct  3 19:51:53 MDT 2002
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 133 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem  = 33140736 (32364K)
avail mem = 25227264 (24636K)
using 430 buffers containing 1761280 bytes (1720K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 07/15/95, BIOS32 rev. 0 @ 0xfdb60
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:01:0 ("SIS 85C503 ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
WARNING: can't reserve area for I/O APIC.
WARNING: can't reserve area for Local APIC.
bios0: ROM list: 0xc0000/0xa000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SIS 85C501" rev 0x00
pcib0 at pci0 dev 1 function 0 "SIS 85C503 ISA" rev 0x01
pciide0 at pci0 dev 1 function 1 "SIS 85C601 EIDE" rev 0x01: no DMA, channel
0 wired to compatibility, channel 1 ywd0 at pciide0 channel 0 drive 0:
<IBM-DPRA-21215>
wd0: 16-sector PIO, LBA, 1160MB, 2358 cyl, 16 head, 63 sec, 2376864 sectors
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-1302B, 2865> SCSI0 5/cdrom
removable
vga1 at pci0 dev 13 function 0 "Chips and Technologies 65550" rev 0x04
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Omega Micro 82C092G" rev 0x02 at pci0 dev 15 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask c040 ttymask d0c2
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

/B.
-- 
Sebastian Benoit <benoit-lists_(_at_)_fb12_(_dot_)_de>
GnuPG 0x5BA22F00 2001-07-31 2999 9839 6C9E E4BF B540  C44B 4EC4 E1BE 5BA2 2F00