not a dc(4)?

[Lucas Reddinger <lucas_(_at_)_wlwdesigns_(_dot_)_com>]

>From what I have seen, dc(4) is arguably a pretty solid NIC. Anyway, I
saw a good deal on these, and decided to take it. Yes, I have already
sent the dmesg to dmesg@, but I was wondering if there was something I
could do to remedy this, so I'm posting here.

vendor "Davicom Technologies", unknown product 0x9009 (class network,
subclass ethernet, rev 0x31) at pci0 dev 11 function 0 not configured

This is what I'm getting in my dmesg. I thought I would be buying a
supported dc(4), but this doesn't seem to have a driver.

Furthermore, it was advertised as Compaq's OEM NIC. I would be willing
to donate a few of these to developer(s), if need be. I know that NICs
have been donated in the past to establish drivers.

Full dmesg follows.

Thanks,
Lucas Reddinger

OpenBSD 3.2 (GENERIC) #0: Wed Apr 16 19:47:43 MDT 2003   
lucas_(_at_)_remmus_(_dot_)_wingedleopard_(_dot_)_net:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: F00F bug workaround installed cpu0: Intel Pentium (P54C)
("GenuineIntel" 586-class) 100 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem  = 58306560 (56940K)
avail mem = 48508928 (47372K)
using 737 buffers containing 3018752 bytes (2948K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(60) BIOS, date 01/19/96, BIOS32 rev. 0 @
0xfc71b pcibios0 at bios0: rev. 2.1 @ 0xfc5e0/0x920
pcibios0: PCI BIOS has 4 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 11
pcibios0: PCI Interrupt Router at 000:01:0 ("SIS 85C503 ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SIS 85C501" rev 0x40
pcib0 at pci0 dev 1 function 0 "SIS 85C503 ISA" rev 0x01
pciide0 at pci0 dev 8 function 0 "CMD Technology PCI0640" rev 0x02: no
DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 82560A4> wd0: 16-sector PIO,
LBA, 2442MB, 4962 cyl, 16 head, 63 sec, 5001728 sectors vga1 at pci0 dev
9 function 0 "S3 Trio32/64" rev 0x00 wsdisplay0 at vga1: console (80x25,
vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "Davicom Technologies", unknown product 0x9009 (class network,
subclass ethernet, rev 0x31) at pci0 dev 11 function 0 not configured
isa0 at pcib0 isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 4040 netmask 4040 ttymask 40c2
pctr: 586-class performance counters and user-level cycle counter
enabled dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302