pcmcia modem - plugged in - nothing in messages

[MERIGHI Marcus <Marcus_(_at_)_Merighi_(_dot_)_AT>]

Hello misc@, 

strange things are happening:
0) Got myself an ibm pcmcia isdn/modem/gsm combo (says ``MODEL
   ST5614GIWWMSR'' on the back) to use in a IBM T20 Notebook (dmesg w/o
   pcmcia cards plugged follows).
1) plugged it in -> "nothing" happened. 
   a) System irresponsive for about three seconds
   b) Most of the time there's just no "/bsd: "-entry in
      /var/log/messages
   c) Sometimes there's "/bsd: cbb0: bad Vcc request

$ grep "bad Vcc request" /var/log/messages | cut -d " " -f 7- | \
sort -u | grep -v wi0
cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x3000031f
cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000386
cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000710
cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000719
cbb0: bad Vcc request. sock_ctrl 0x22, sock_status 0x30000710
cbb1: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000386
cbb1: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000710
cbb1: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000719
cbb1: bad Vcc request. sock_ctrl 0x22, sock_status 0x30000710

2) Started isolating:
   a) pcmcia/cbb works with my WLAN pcmcia card
   b) gave windows xp a go, that OS popped up the "new hardware found"
      balloon, showed right name - but didn't find a driver.
3) Started reading, found nothing.
4) Had to bother misc@

Am I missing something? Any hints?

Thanks for your time, 

Max
OpenBSD 3.5 (GENERIC) #34: Mon Mar 29 12:24:55 MST 2004
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 697 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 133738496 (130604K)
avail mem = 117833728 (115072K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(30) BIOS, date 12/21/99, BIOS32 rev. 0 @ 0xfd820
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 83%
apm0: AC on, battery charge high
pcibios0 at bios0: rev. 2.1 @ 0xfd7b0/0x850
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdee0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x800 0xe0000/0x10000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x11
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 2 function 0 "Texas Instruments PCI1450 CardBus" rev 0x03: irq 11
cbb1 at pci0 dev 2 function 1 "Texas Instruments PCI1450 CardBus" rev 0x03: irq 11
xl0 at pci0 dev 3 function 0 "3Com 3c556B 100Base-TX" rev 0x20: irq 9 address 00:00:86:4a:52:34
acphy0 at xl0 phy 0: AC101 10/100 media interface, rev. 11
"3Com Mini-PCI V.90 Modem" rev 0x20 at pci0 dev 3 function 1 not configured
clcs0 at pci0 dev 5 function 0 "Cirrus Logic CS4280/46xx CrystalClear Audio" rev 0x01: irq 11
ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at clcs0
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4025GAS>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HITACHI, DVD-ROM GD-S200, 0033> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x03 at pci0 dev 7 function 3 not configured
cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000386
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask c840 netmask ca40 ttymask dac2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302