[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: ASUS PC-DL DualXeon won't work with GENERIC.MP
- To: misc_(_at_)_openbsd_(_dot_)_org
- Subject: Re: ASUS PC-DL DualXeon won't work with GENERIC.MP
- From: "John G. Gavrilita" <jg_(_at_)_utm_(_dot_)_md>
- Date: Thu, 18 Nov 2004 19:32:09 +0200
Hi folks!
Yasterday i spoked with guys who sold me the box and they gave the permission to open the box, so i've tested it with less memory, 512MB.
Anyway, it behave the same way.
dmesg below.
Recompiling the GENERIC.MP on the machine gives nothing, i.e. same behavior
What could it be done to solve this problem?
>> OpenBSD/i386 BOOT 2.06
boot> boot bsd.mp
booting hd0a:bsd.mp: 4967004+864308 [52+232928]=0x5fc3c4
entry point at 0x100120
[ using 444724 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2004 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.6 (GENERIC.MP) #173: Fri Sep 17 12:52:31 MDT 2004
deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 1072209920 (1047080K)
avail mem = 971702272 (948928K)
using 4278 buffers containing 53714944 bytes (52456K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(10) BIOS, date 09/14/04, BIOS32 rev. 0 @ 0xfb7c0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf54
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde60/224 (12 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12 15
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x8000
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CNXT-ID
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apic 4
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82875P AGP" rev 0x02
pci1 at ppb0 bus 1
ppb1 at pci0 dev 3 function 0 "Intel 82875P PCI-CSA" rev 0x02
pci2 at ppb1 bus 2
em0 at pci2 dev 1 function 0 "Intel PRO/1000CT (82547EI)" rev 0x00: apic 4 int 18 (irq 15), address: 00:0e:a6:5f:77:5b
ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci3 at ppb2 bus 3
vga1 at pci3 dev 9 function 0 "S3 ViRGE DX/GX" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci3 dev 10 function 0 "Realtek 8139" rev 0x10: apic 4 int 22 (irq 11) address 00:c0:26:8c:5d:f2
rlphy0 at rl0 phy 0: RTL internal phy
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CR-48XGTE, 1.0K> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 16 (irq 15) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SAMSUNG SP1614C>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <SAMSUNG SP1614C>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lm0 at isa0 port 0x290/8: W83627THF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
wd0(pciide1:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
wd0(pciide1:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
Now, with disabling apm @ ukc>:
>> OpenBSD/i386 BOOT 2.06
boot> boot bsd.mp -c
booting hd0a:bsd.mp: 4967004+864308 [52+232928+211371]=0x5fc3c4
entry point at 0x100120
[ using 444724 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2004 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.6 (GENERIC.MP) #173: Fri Sep 17 12:52:31 MDT 2004
deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 1072209920 (1047080K)
avail mem = 971702272 (948928K)
using 4278 buffers containing 53714944 bytes (52456K) of memory
User Kernel Config
UKC> find apm
239 apm0 at bios0 flags 0x0
UKC> disable apm0
239 apm0 disabled
UKC> exit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(10) BIOS, date 09/14/04, BIOS32 rev. 0 @ 0xfb7c0
apm at bios0 function 0x15 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf54
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde60/224 (12 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12 15
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x8000
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CNXT-ID
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apic 4
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82875P AGP" rev 0x02
pci1 at ppb0 bus 1
ppb1 at pci0 dev 3 function 0 "Intel 82875P PCI-CSA" rev 0x02
pci2 at ppb1 bus 2
em0 at pci2 dev 1 function 0 "Intel PRO/1000CT (82547EI)" rev 0x00: apic 4 int 18 (irq 15), address: 00:0e:a6:5f:77:5b
ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci3 at ppb2 bus 3
vga1 at pci3 dev 9 function 0 "S3 ViRGE DX/GX" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci3 dev 10 function 0 "Realtek 8139" rev 0x10: apic 4 int 22 (irq 11) address 00:c0:26:8c:5d:f2
rlphy0 at rl0 phy 0: RTL internal phy
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CR-48XGTE, 1.0K> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 16 (irq 15) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SAMSUNG SP1614C>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <SAMSUNG SP1614C>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lm0 at isa0 port 0x290/8: W83627THF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
wd0(pciide1:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
wd0(pciide1:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
... produces same things, this time in profile only ;-)
Any help would be gratly appreciated! thanks!
---------------------------------------------------
Ion Gavrilita, Technical University of Moldova,
Network and Systems Administrator,
+3737-9543210 (private cell);
+3736-9138776 (corporate cell);
+37322-497025, int 23 (work)
---------------------------------------------------
Visit your host, monkey.org