Re: Raid card + amd64 + SMP

[Henning Brauer <lists-openbsd_(_at_)_bsws_(_dot_)_de>]

* David Rio Deiros <driodeiros_(_at_)_gmail_(_dot_)_com> [2005-02-05 01:59]:
> I would like to know if anyone out there is using a RAID-5 card in a 
> system running openbsd (3.6 or -current) with a dual amd64 cpu. 

only single, but works like a charm.
The controller is a LSI MegaRAID 320-1 with 4 Seagate 36GB U320 disks.

OpenBSD 3.6-current (GENERIC) #0: Thu Feb  3 16:17:44 CET 2005
    henning_(_at_)_odumin_(_dot_)_bsws_(_dot_)_de:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 267939840 (261660K)
avail mem = 219860992 (214708K)
using 6592 buffers containing 27000832 bytes (26368K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 2014.45 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
ami0 at pci0 dev 8 function 0 "Symbios Logic MegaRAID" rev 0x01: irq 10 LSI 520/64b/lhc
ami0: FW 1L37, BIOS vG119, 64MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 104193MB, 13282 cyl, 255 head, 63 sec, 512 bytes/sec, 213387264 sec total
siop0 at pci0 dev 9 function 0 "Symbios Logic 53c895" rev 0x01: irq 11, using 4K of on-board RAM
scsibus1 at siop0: 16 targets
st0 at scsibus1 targ 6 lun 0: <BNCHMARK, DLT1, 5032> SCSI2 1/sequential removable
st0: drive empty or not ready
skc0 at pci0 dev 14 function 0 "3Com 3c940" rev 0x12: irq 12
skc0: 3Com Gigabit LOM (3C940) (0x1)
sk0 at skc0 port A: address 00:0a:48:0c:16:16
eephy0 at sk0 phy 0: Marvell 88E1000* Gigabit PHY
pciide0 at pci0 dev 15 function 0 "VIA VT8237 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
pciide1: channel 1 disabled (no drives)
"VIA VT8237 ISA" rev 0x00 at pci0 dev 17 function 0 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83697HF
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02