[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Symbol Spectrum24 device timeout on 3.6-release



Hi misc@ 
 
I've been trying to use ad-hoc mode with a Symbol "LA-4123-1000-EU" without 
success. (LA4123 appears as supported in wi(4) and 
http://www.openbsd.org/i386.html#hardware). It works under windows in the 
same box.  
 
Just after startup I got "wi0: device timeout" with every config command. 
After several hours I got constants "wi0: wi_cmd failed with 5"  
 
Interrupt counter of this device doesn't increase: 
 
#vmstat -v -zi 
interrupt               total     rate 
irq14/pciide0            3785        0 
irq15/pciide0               0        0 
irq9/auich0                 0        0 
irq5/sis0             1299271       16 
irq3/wi0                    0        0 
irq1/pckbc0               548        0 
irq7/lpt0                   0        0 
irq4/pccom0                 0        0 
irq6/fdc0                   0        0 
irq0/clock            8048720      100 
irq8/rtc             10302505      128 
Total                19654829      244 
 
Card config looks fine: 
 
# wicontrol wi0 
NIC serial number:                      [ TA4281192    ] 
Station name:                           [ WaveLAN/IEEE node ] 
SSID for IBSS creation:                 [ IBSS ] 
Current netname (SSID):                 [ TEST ] 
Desired netname (SSID):                 [ TEST ] 
Current BSSID:                          [ 00:00:00:00:00:00 ] 
Channel list:                           [ 8191 ] 
IBSS channel:                           [ 11 ] 
Current channel:                        [ 11 ] 
Comms quality/signal/noise:             [ 0 27 27 ] 
Promiscuous mode:                       [ Off ] 
Process 802.11b Frame:                  [ Off ] 
Port type (1=BSS, 3=ad-hoc, 6=Host AP): [ 3 ] 
MAC address:                            [ 00:a0:f8:b3:e5:e6 ] 
TX rate (selection):                    [ 3 ] 
TX rate (actual speed):                 [ 11 ] 
Maximum data length:                    [ 2304 ] 
RTS/CTS handshake threshold:            [ 2347 ] 
Create IBSS:                            [ Off ] 
Antenna diversity (0=auto,1=pri,2=aux): [ 0 ] 
Microwave oven robustness:              [ Off ] 
Roaming mode(1=firm,3=disable):         [ 0 ] 
Access point density:                   [ ] 
Power Management:                       [ Off ] 
Max sleep time:                         [ 100 ] 
Enhanced Security mode:                 [ ] 
Intersil Prism2-based card:             [ 1 ] 
Card info:                              [ PRISM2 HFA3841(EVB2), Firmware 
2.1.2 ] 
 
 
Counters doesn't increase: 
 
# wicontrol -o wi0 
Transmitted unicast frames:             0 
Transmitted multicast frames:           0 
Transmitted fragments:                  0 
Transmitted unicast octets:             0 
Transmitted multicast octets:           0 
Single transmit retries:                0 
Multiple transmit retries:              0 
Transmit retry limit exceeded:          0 
Transmit discards:                      0 
Transmit discards due to wrong SA:      0 
Received unicast frames:                0 
Received multicast frames:              0 
Received fragments:                     0 
Received unicast octets:                0 
Received multicast octets:              0 
Receive FCS errors:                     0 
Receive discards due to no buffer:      0 
Can't decrypt WEP frame:                0 
Received message fragments:             0 
Received message bad fragments:         0 
 
 
Finally, dmesg: 
 
OpenBSD 3.6 (GENERIC) #59: Fri Sep 17 12:32:57 MDT 2004 
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC 
cpu0: Intel(R) Celeron(R) CPU 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz 
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM 
real mem  = 234401792 (228908K) 
avail mem = 207011840 (202160K) 
using 2886 buffers containing 11821056 bytes (11544K) of memory 
mainbus0 (root) 
bios0 at mainbus0: AT/286+(a0) BIOS, date 11/12/02, BIOS32 rev. 0 @ 0xfba50 
apm0 at bios0: Power Management spec V1.2 
apm0: AC on, battery charge unknown 
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdcc4 
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdc30/128 (6 entries) 
pcibios0: PCI Exclusive IRQs: 3 5 9 11 
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00) 
pcibios0: PCI bus #1 is the last bus 
bios0: ROM list: 0xc0000/0xc000 
cpu0 at mainbus0 
pci0 at mainbus0 bus 0: configuration mode 1 (no bios) 
pchb0 at pci0 dev 0 function 0 "SIS 651 PCI" rev 0x01 
ppb0 at pci0 dev 1 function 0 "SIS 86C201 AGP" rev 0x00 
pci1 at ppb0 bus 1 
vga1 at pci1 dev 0 function 0 "SIS 650 VGA" rev 0x00: aperture at 
0xd8000000, size 0x400000 
wsdisplay0 at vga1: console (80x25, vt100 emulation) 
wsdisplay0: screen 1-5 added (80x25, vt100 emulation) 
pcib0 at pci0 dev 2 function 0 "SIS 85C503 System" rev 0x04 
"SIS 7007 FireWire" rev 0x00 at pci0 dev 2 function 3 not configured 
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0x00: 651: DMA, channel 
0 configured to compatibility, channel 1 confi 
gured to compatibility 
wd0 at pciide0 channel 0 drive 0: <ST360012A> 
wd0: 16-sector PIO, LBA, 57241MB, 117231408 sectors 
atapiscsi0 at pciide0 channel 0 drive 1 
scsibus0 at atapiscsi0: 2 targets 
cd0 at scsibus0 targ 0 lun 0: <JLMS, DVD-ROM LTD-165H, CH0U> SCSI0 5/cdrom 
removable 
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 3 
atapiscsi1 at pciide0 channel 1 drive 0 
scsibus1 at atapiscsi1: 2 targets 
cd1 at scsibus1 targ 0 lun 0: <MITSUMI, CR-48XETE, 482R> SCSI0 5/cdrom 
removable 
cd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 
auich0 at pci0 dev 2 function 7 "SIS 7012 AC97" rev 0xa0: irq 9, SiS7012 
AC97 
ac97: codec id 0x414c4720 (Avance Logic ALC650) 
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D 
audio0 at auich0 
sis0 at pci0 dev 4 function 0 "SIS 900 10/100BaseTX" rev 0x90: irq 5, 
address 00:10:dc:d9:76:a6 
ukphy0 at sis0 phy 1: Generic IEEE 802.3u media interface 
ukphy0: OUI 0x000020, model 0x0020, rev. 1 
wi0 at pci0 dev 6 function 0 "Symbol Spectrum24 LA41X3" rev 0x10: irq 3 
wi0: Symbol PRISM2 HFA3841(EVB2), Firmware 2.1.2 (primary), 2.51.4 
(station), address 00:a0:f8:b3:e5:e6 
isa0 at pcib0 
isadma0 at isa0 
pckbc0 at isa0 port 0x60/5 
pckbd0 at pckbc0 (kbd slot) 
pckbc0: using irq 1 for kbd slot 
wskbd0 at pckbd0: console keyboard, using wsdisplay0 
pcppi0 at isa0 port 0x61 
midi0 at pcppi0: <PC speaker> 
sysbeep0 at pcppi0 
lpt0 at isa0 port 0x378/4 irq 7 
lm0 at isa0 port 0x290/8: W83697HF 
npx0 at isa0 port 0xf0/16: using exception 16 
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo 
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec 
biomask fd45 netmask fd6d ttymask fdef 
pctr: user-level cycle counter enabled 
dkcsum: wd0 matched BIOS disk 80 
root on wd0a 
rootdev=0x0 rrootdev=0x300 rawdev=0x302 
 
 
 
Any help apreciated... 
 
 
 
----------------------------------------------------------------------------
                         GRUPO CARRERAS, S.A.
                        www.grupocarreras.com
----------------------------------------------------------------------------



Visit your host, monkey.org