Re: sound card problem

[steven mestdagh <steven_(_dot_)_mestdagh_(_at_)_esat_(_dot_)_kuleuven_(_dot_)_ac_(_dot_)_be>]

> Hi
> I just want to find out why my sound card is not working .. it says:
> bash-3.00$ mixerctl -a
> mixerctl: /dev/mixer: Device not configured
> bash-3.00$
> 
> and this is dmesg:
> OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
>     deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 401 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
> real mem  = 133799936 (130664K)
> avail mem = 115593216 (112884K)
> using 1658 buffers containing 6791168 bytes (6632K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(47) BIOS, date 11/30/98, BIOS32 rev. 0 @ 0xfb410
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb88c
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfded0/144 (7 entries)
> pcibios0: PCI Exclusive IRQs: 10 11
> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x8000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Rage Pro" rev 0x5c
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLlct10 15>
> wd0: 16-sector PIO, LBA, 14324MB, 29336832 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 10
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> "Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not configured
> ne3 at pci0 dev 9 function 0 "Realtek 8029" rev 0x00: irq 11
> ne3: address 00:60:52:06:ff:8e
> clct0 at pci0 dev 12 function 0 "Cirrus Logic CS4281 CrystalClear
> Audio" rev 0x01 irq 10
> clct0: Timeout waiting for Codec calibration

well, clct0 is using the same irq as uhci0. try a different irq for one
of them by booting into the UKC (boot -c at the boot> prompt) and
examining your dmesg again.