Re: Antares le ethernet again

[Sean Brown <sblinux_(_at_)_shaw_(_dot_)_ca>]

On April 4, 2005 3:23 am, J.C. Roberts wrote:
> On Sun, 03 Apr 2005 22:06:16 -0600, Sean Brown <sblinux_(_at_)_shaw_(_dot_)_ca>
>
> wrote:
> >Ok, I know I had this problem once before, but its slightly different this
> >time.
> >I have a Sparcstation 5 with 2 antares le ethernet cards in addition to an
> > hme and the onboard le. Last time, around January, building a release
> > only ever found the onboard one. However after some help and patches from
> > Theo and Miod, it found them all.
> >
> >I let a bunch of patches pile up that I wasn't worried about, and decided
> > to make another release this weekend. I looked at the patches again and
> > compared them to the kernel config files that i checked out from CVS and
> > it looked like the patch was in the kernel so i went ahead and built it.
> > However when I upgrade the SS5, it only sees hme0, le0 and le1, its
> > missing an le interface.
> >
> >I am at something of a loss to explain it, so again, help would be
> >appreciated.
>
> Of the le interfaces, which one is not being found? -is it one of the
> antares cards or the onboard?
>
> dmesg?
dmesg missing an le device:

OpenBSD 3.6-stable (GENERIC) #2: Sun Apr  3 21:27:26 MDT 2005
    sbrown_(_at_)_messenia_(_dot_)_unix_(_dot_)_subatomic_(_dot_)_local:/usr/src/sys/arch/sparc/compile/GENERIC
real mem = 66764800
avail mem = 56279040
using 200 buffers containing 3338240 bytes of memory
bootpath: /iommu_(_at_)_0,10000000/sbus_(_at_)_0,10001000/espdma_(_at_)_5,8400000/esp_(_at_)_5,8800000/sd_(_at_)_3,
0
mainbus0 (root): SUNW,SPARCstation-5
cpu0 at mainbus0: MB86904 @ 85 MHz, on-chip FPU
cpu0: 16K instruction (32 b/l), 8K data (16 b/l) cache enabled
obio0 at mainbus0
clock0 at obio0 addr 0x71200000: mk48t08 (eeprom)
timer0 at obio0 addr 0x71d00000 delay constant 40
zs0 at obio0 addr 0x71100000 pri 12, softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at obio0 addr 0x71000000 pri 12, softpri 6
zskbd0 at zs1 channel 0: reset timeout
zskbd0: no keyboard
zstty2 at zs1 channel 1: mouse
slavioconfig at obio0 addr 0x71800000 not configured
auxreg0 at obio0 addr 0x71900000
power0 at obio0 addr 0x71910000
fdc0 at obio0 addr 0x71400000 pri 11, softpri 4: chip 82077
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
iommu0 at mainbus0 addr 0x10000000: version 0x4/0x0, page-size 4096, range 
64MB
sbus0 at iommu0: clock = 21.250 MHz
dma0 at sbus0 slot 5 offset 0x8400000: rev 2
esp0 at dma0 offset 0x8800000 pri 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 3 lun 0: <IBM-PCCO, DDRS-34560Y !#, S97B> SCSI2 0/direct 
fi
xed
sd0: 4303MB, 8387 cyl, 5 head, 210 sec, 512 bytes/sec, 8813870 sec total
bpp0 at sbus0 slot 5 offset 0xc800000: DMA2
ledma0 at sbus0 slot 5 offset 0x8400010: rev 2
le0 at ledma0 offset 0x8c00000 pri 6: address 08:00:20:77:24:20
le0: 16 receive buffers, 4 transmit buffers
audiocs0 at sbus0 slot 4 offset 0xc000000 pri 9, softpri 4
audio0 at audiocs0
power-management at sbus0 slot 4 offset 0xa000000 not configured
dma1 at sbus0 slot 1 offset 0x81000: rev esc
esp1 at dma1 offset 0x80000 pri 5: ESP200, 40MHz, SCSI ID 7
scsibus1 at esp1: 8 targets
lebuffer0 at sbus0 slot 1 offset 0x40000: 128K memory
le1 at lebuffer0 offset 0x60000 pri 7: address 08:00:20:77:24:20
le1: 64 receive buffers, 16 transmit buffers
dma2 at sbus0 slot 2 offset 0x200000: rev 2
esp2 at dma2 offset 0x400000 pri 5: ESP200, 40MHz, SCSI ID 7
scsibus2 at esp2: 8 targets
ledma at sbus0 slot 2 offset 0x200010 not configured
hme0 at sbus0 slot 3 offset 0x8c00000 pri 7: address 08:00:20:77:24:20 rev 34
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
root on sd0a
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102