possibility of running openbsd on a BL20p G3?

[bofh <goodb0fh_(_at_)_gmail_(_dot_)_com>]

Hi,

Trying to install openbsd 3.6 on a HP Proliant BL20p G3.
It has a HP NC7781 Gigabit NIC and a QLA2312 PCI fibre channel. Connected to
a SAN.
But of course, it doesn't work, as the hardware is apparently modified just
enough
so that OpenBSD doesn't recognize it.

Just wondering if it's possible to make the isp driver support QLA2312
(0x2312), and
the bge to support 0x16c7.

Both the geeks involved in this install would prefer to use OpenBSD 8-)

Thanx very much in advance.

-Tai


dmesg is as follows:


OpenBSD 3.6 (RAMDISK_CD) #378: Fri Sep 17 13:04:04 MDT 2004
deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(TM) CPU 3.20Ghz ("GenuineIntel" 686-class) 3.20 Ghz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,CNXT-ID
real mem = 4227358720 (4128280K)
avail mem = 3403051008 (3323292K)
using 4278 buffers containing 211472384 bytes (206516K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x2c00
0xcec00/0x1800 0x
ee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x0c
ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE Port A0" rev 0x0c
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIX Bridge Hub A" rev 0x09
pci2 at ppb1 bus 2
isp0 at pci2 dev 3 function 0 vendor "QLogic", unknown product 0x2312 rev
0x02pc
i_intr_map: no mapping for pin A
: couldn't map interrupt
isp1 at pci2 dev 3 function 1 vendor "QLogic", unknown 0x2312 rev 0x02:
irq 5
scsibus0 at isp1: 256 targets
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIX Bridge Hub B" rev 0x09
pci3 at ppb2 bus 3
vendor "Broadcom", unknown product 0x16c7 (class network subclass ethernet,
rev
0x10) at pci3 dev 2 function 0 not configured
vendor "Broadcom", unknown product 0x16c7 (class network subclass ethernet,
rev
0x10) at pci3 dev 3 function 0 not configured
vendor "Broadcom", unknown product 0x16c7 (class network subclass ethernet,
rev
0x10) at pci3 dev 4 function 0 not configured
ppb3 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci4 at ppb3 bus 4
vendor "Broadcom", unknown product 0x16c7 (class network subclass ethernet,
rev
0x10) at pci4 dev 1 function 0 not configured
vendor "Compaq", unknown product 0x46 (class mass storage subclass RAID, rev
0x0
1) at pci4 dev 2 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 5300ESB USB" rev 0x02: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 5
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
pci5 at ppb4 bus 5
vga1 at pci5 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
vendor "Compaq", unknown product 0xb203 (class system subclass
miscellaneous, re
v 0x01) at pci5 dev 4 function 0 not configured
vendor "Compaq", unknown product 0xb204 (class system subclass
miscellaneous, re
v 0x01) at pci5 dev 4 function 2 not configured
pcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA
(unsupported
), channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ffe5 netmask ffe5 ttymask ffe7
fd0: fixed, 3560 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: HP Virtual Management Device, rev 1.10/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
cd0 at scsibus1 targ 1 lun 0: <HP, Virtual CD-ROM, 0.01> SCSI2 5/cdrom
removable