Re: possibility of running openbsd on a BL20p G3?

[Brad <brad_(_at_)_comstyle_(_dot_)_com>]

On Thu, Apr 07, 2005 at 07:11:22PM -0500, bofh wrote:
> Hi,
> 
> Trying to install openbsd 3.6 on a HP Proliant BL20p G3.
> It has a HP NC7781 Gigabit NIC and a QLA2312 PCI fibre channel. Connected to
> a SAN.
> But of course, it doesn't work, as the hardware is apparently modified just
> enough
> so that OpenBSD doesn't recognize it.
> 
> Just wondering if it's possible to make the isp driver support QLA2312
> (0x2312), and
> the bge to support 0x16c7.
> 
> Both the geeks involved in this install would prefer to use OpenBSD 8-)
> 
> Thanx very much in advance.
> 
> -Tai

The 3 Broadcom NICs definitely will not work with 3.6. I added support for
these cards after 3.6. The QLogic 2Gbps Fibre Channel cards should be
be supported, but it appears that you're having some sort of interrupt
mapping problem.

Try a -current snap, see if the NICs at least work. Maybe the situation
with the QLogic cards will have been resolved too.

> dmesg is as follows:
> 
> 
> OpenBSD 3.6 (RAMDISK_CD) #378: Fri Sep 17 13:04:04 MDT 2004
> deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Intel(R) Xeon(TM) CPU 3.20Ghz ("GenuineIntel" 686-class) 3.20 Ghz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,CNXT-ID
> real mem = 4227358720 (4128280K)
> avail mem = 3403051008 (3323292K)
> using 4278 buffers containing 211472384 bytes (206516K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
> pcibios0: PCI BIOS has 9 Interrupt Routing table entries
> pcibios0: no compatible PCI ICU found
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI bus #5 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x2c00
> 0xcec00/0x1800 0x
> ee000/0x2000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x0c
> ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE Port A0" rev 0x0c
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIX Bridge Hub A" rev 0x09
> pci2 at ppb1 bus 2
> isp0 at pci2 dev 3 function 0 vendor "QLogic", unknown product 0x2312 rev
> 0x02pc
> i_intr_map: no mapping for pin A
> : couldn't map interrupt
> isp1 at pci2 dev 3 function 1 vendor "QLogic", unknown 0x2312 rev 0x02:
> irq 5
> scsibus0 at isp1: 256 targets
> ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIX Bridge Hub B" rev 0x09
> pci3 at ppb2 bus 3
> vendor "Broadcom", unknown product 0x16c7 (class network subclass ethernet,
> rev
> 0x10) at pci3 dev 2 function 0 not configured
> vendor "Broadcom", unknown product 0x16c7 (class network subclass ethernet,
> rev
> 0x10) at pci3 dev 3 function 0 not configured
> vendor "Broadcom", unknown product 0x16c7 (class network subclass ethernet,
> rev
> 0x10) at pci3 dev 4 function 0 not configured
> ppb3 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
> pci4 at ppb3 bus 4
> vendor "Broadcom", unknown product 0x16c7 (class network subclass ethernet,
> rev
> 0x10) at pci4 dev 1 function 0 not configured
> vendor "Compaq", unknown product 0x46 (class mass storage subclass RAID, rev
> 0x0
> 1) at pci4 dev 2 function 0 not configured
> uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 5
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 5300ESB USB" rev 0x02: irq 5
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> "Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
> "Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
> ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 5
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: uhci0 uhci1
> usb2 at ehci0: USB revision 2.0
> uhub2 at usb2
> uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub2: 4 ports with 4 removable, self powered
> ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
> pci5 at ppb4 bus 5
> vga1 at pci5 dev 3 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> vendor "Compaq", unknown product 0xb203 (class system subclass
> miscellaneous, re
> v 0x01) at pci5 dev 4 function 0 not configured
> vendor "Compaq", unknown product 0xb204 (class system subclass
> miscellaneous, re
> v 0x01) at pci5 dev 4 function 2 not configured
> pcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA
> (unsupported
> ), channel 0 configured to compatibility, channel 1 configured to
> compatibility
> pciide0: channel 0 ignored (not responding; disabled or no drives?)
> pciide0: channel 1 ignored (not responding; disabled or no drives?)
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> biomask ffe5 netmask ffe5 ttymask ffe7
> fd0: fixed, 3560 blocks
> root on rd0a
> rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
> umass0 at uhub0 port 1 configuration 1 interface 0
> umass0: HP Virtual Management Device, rev 1.10/0.01, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> cd0 at scsibus1 targ 1 lun 0: <HP, Virtual CD-ROM, 0.01> SCSI2 5/cdrom
> removable