Initializing USB drive

["L. V. Lammert" <lvl_(_at_)_omnitec_(_dot_)_net>]

Per the thread last week on backup devices, I now have an external 80GB USB 
drive to use for backup, but I can't finding anything in the man pages or 
archives about initializing except a note that the device would probably be 
sd0i. I'm assuming it would be less-than-optimal to initialize as FAT, so 
can anyone point me towards resources for initializing as standard BSD4.2?

dmesg below (GENERIC + RAIDFrame).

	Thanks!!

	Lee

OpenBSD 3.6 (Everdry) #0: Thu Apr  7 16:48:21 CDT 2005
    root_(_at_)_Mainserver_(_dot_)_omnitec_(_dot_)_net:/usr/src/sys/arch/i386/compile/Everdry
cpu0: AMD Athlon(tm) 1500+ ("AuthenticAMD" 686-class) 1.35 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 535666688 (523112K)
avail mem = 481304576 (470024K)
using 4278 buffers containing 26886144 bytes (26256K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/24/04, BIOS32 rev. 0 @ 0xf0010
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4750/224 (12 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1106 product 0x3227
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4400!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "VIA", unknown product 0x269 rev 0x80
pchb1 at pci0 dev 0 function 1 vendor "VIA", unknown product 0x1269 rev 0x00
pchb2 at pci0 dev 0 function 2 vendor "VIA", unknown product 0x2269 rev 0x00
pchb3 at pci0 dev 0 function 3 vendor "VIA", unknown product 0x3269 rev 0x00
pchb4 at pci0 dev 0 function 4 vendor "VIA", unknown product 0x4269 rev 0x00
pchb5 at pci0 dev 0 function 7 vendor "VIA", unknown product 0x7269 rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
dc0 at pci0 dev 10 function 0 "Davicom DM9102" rev 0x31: irq 11, address 
00:08:a1:6a:37:4c
amphy0 at dc0 phy 1: Am79C873 10/100 media interface, rev. 0
pciide0 at pci0 dev 15 function 0 "VIA VT8237 SATA" rev 0x80: DMA
pciide0: using irq 10 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST380817AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <ST380817AS>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, 
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM CDU5212, 5YS1> SCSI0 5/cdrom 
removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB 2.0" rev 0x86: irq 10
ehci0: EHCI version 1.0
ehci0: companion controller, 2 ports each: uhci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 10
ac97: codec id 0x41445368 (Analog Devices <68>)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auvia0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
Kernelized RAIDframe activated
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
raid0: Component /dev/wd0g being configured at row: 0 col: 0
         Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
         Version: 2 Serial Number: 12345 Mod Counter: 192
         Clean: Yes Status: 0
raid0: Component /dev/wd1g being configured at row: 0 col: 1
         Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
         Version: 2 Serial Number: 12345 Mod Counter: 192
         Clean: Yes Status: 0
raid0 (root)