[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: pkg_add -u

I'm running current btw.




OpenBSD 3.8-beta (GENERIC) #111: Sun Aug 21 18:44:56 MDT 2005
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 698 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 334471168 (326632K)
avail mem = 297816064 (290836K)
using 4108 buffers containing 16826368 bytes (16432K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 03/15/01, BIOS32 rev. 0 @ 0xfbf88
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, estimated 1:53 hours
apm0: flags 20102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf01c0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xe0000/0x10000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x11: rng active, 8Kb/sec
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x11
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Trident CyberBlade XP" rev 0x63
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x03
pci2 at ppb1 bus 2
fxp0 at pci2 dev 8 function 0 "Intel 82562" rev 0x03: irq 11, address 00:00:39:bf:03:81
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cbb0 at pci2 dev 13 function 0 "Toshiba ToPIC100 CardBus" rev 0x31: irq 11
cbb1 at pci2 dev 13 function 1 "Toshiba ToPIC100 CardBus" rev 0x31: irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x03: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1016GAP>
wd0: 16-sector PIO, LBA, 9590MB, 19640880 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E-BA, 7.7C> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x03: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x03: irq 11, ICH2 AC97
ac97: codec id 0x594d4800 (Yamaha YMF743-S)
ac97: codec features 18 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801BA Modem" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef6d netmask ef6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
rtw0 at cardbus0 dev 0 function 0 irq 11
rtw0: ver RTL8180F, radio SA2400A, amp SA2411, address 00:0d:88:64:e4:7f
rtw_seg_too_short: segment too short
rtw_seg_too_short: segment too short
rtw_seg_too_short: segment too short
rtw_seg_too_short: segment too short
rtw_seg_too_short: segment too short
rtw0: transmit timeout, priority 1
rtw0: DMA error/FIFO overflow 04000000, rx descriptor 51
rtw0: DMA error/FIFO overflow 04000000, rx descriptor 52
rtw_seg_too_short: segment too short
rtw0 detached
rtw0 at cardbus0 dev 0 function 0 irq 11
rtw0: ver RTL8180F, radio SA2400A, amp SA2411, address 00:0d:88:64:e4:7f
rtw_seg_too_short: segment too short
rtw_seg_too_short: segment too short
rtw_seg_too_short: segment too short
rtw_seg_too_short: segment too short
rtw_seg_too_short: segment too short
rtw_seg_too_short: segment too short
rtw_seg_too_short: segment too short
rtw0 detached
syncing disks... done
rebooting...
OpenBSD 3.8-beta (RAMDISK_CD) #772: Sun Aug 21 19:01:11 MDT 2005
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 698 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 334471168 (326632K)
avail mem = 298840064 (291836K)
using 4108 buffers containing 16826368 bytes (16432K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 03/15/01, BIOS32 rev. 0 @ 0xfbf88
apm0 at bios0: Power Management spec V1.2
apm0: flags 20102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf01c0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xe0000/0x10000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x11: rng active, 7Kb/sec
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x11
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Trident CyberBlade XP" rev 0x63
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x03
pci2 at ppb1 bus 2
fxp0 at pci2 dev 8 function 0 "Intel 82562" rev 0x03: irq 11, address 00:00:39:bf:03:81
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cbb0 at pci2 dev 13 function 0 "Toshiba ToPIC100 CardBus" rev 0x31: irq 11
cbb1 at pci2 dev 13 function 1 "Toshiba ToPIC100 CardBus" rev 0x31: irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1016GAP>
wd0: 16-sector PIO, LBA, 9590MB, 19640880 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E-BA, 7.7C> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x03: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
"Intel 82801BA AC97" rev 0x03 at pci0 dev 31 function 5 not configured
"Intel 82801BA Modem" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffed netmask ffed ttymask ffef
rd0: fixed, 3800 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
syncing disks... done
rebooting...
OpenBSD 3.8-current (GENERIC) #183: Sat Oct  8 12:33:07 MDT 2005
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 698 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 334471168 (326632K)
avail mem = 297857024 (290876K)
using 4108 buffers containing 16826368 bytes (16432K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 03/15/01, BIOS32 rev. 0 @ 0xfbf88
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high
apm0: flags 20102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf01c0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xe0000/0x10000!
ipmi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x11: rng active, 7Kb/sec
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x11
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Trident CyberBlade XP" rev 0x63
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x03
pci2 at ppb1 bus 2
fxp0 at pci2 dev 8 function 0 "Intel 82562" rev 0x03: irq 11, address 00:00:39:bf:03:81
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cbb0 at pci2 dev 13 function 0 "Toshiba ToPIC100 CardBus" rev 0x31: irq 11
cbb1 at pci2 dev 13 function 1 "Toshiba ToPIC100 CardBus" rev 0x31: irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x03: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1016GAP>
wd0: 16-sector PIO, LBA, 9590MB, 19640880 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E-BA, 7.7C> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x03: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x03: irq 11, ICH2 AC97
ac97: codec id 0x594d4800 (Yamaha YMF743-S)
ac97: codec features 18 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801BA Modem" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef6d netmask ef6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Visit your host, monkey.org