Tekram DC395U/UW/F DC315/U

[Martin Akesson <ma_(_at_)_placid_(_dot_)_tv>]

Hi all,

I've just finished testing my port of the NetBSD drivers available for
these Tekram cards on my OpenBSD 2.8 machine.  I am not sure if it
breaks other thing, however on my system everything works just fine so
I decided to let others make use of my findings.

Get my patch at:
http://www.placid.tv/tekram/

The original NetBSD driver is also in there however if you feel like
getting it straight from the source go to:
ftp://ftp.tekram.com/scsi/3X5/NetBSD/NetBSD1.4

When installing don't follow the instructions found at the Tekram ftp
since they are for NetBSD, instead follow what is inside the README in
my tar archive.

---------------------------------------------------[dmesg output-start]
trm0 at pci0 dev 13 function 0 "Tekram Technology(2) DC-3x5U" rev 0x01
Tekram DC395U/UW/F DC315/U (TRM-S1040) Fast20 Wide SCSI Adapter 
probe(trm0:0:0):  Adapter ID=7 ,Max tag number=32 ,128 SCBs 
scsibus0 at trm0: 8 targets
DC395x(TRM-S1040): target 5, 8bits Narrow transfer 
DC395x(TRM-S1040): target 5, Sync transfer 10.0 MB/sec, Offset 8 
cd0 at scsibus0 targ 5 lun 0: <MATSHITA, CD-R   CW-7502, 4.10> SCSI2
5/cdrom removable
DC395x(TRM-S1040): target 6, 8bits Narrow transfer 
DC395x(TRM-S1040): target 6, Sync transfer 20.83 MB/sec, Offset 15 
cd1 at scsibus0 targ 6 lun 0: <PLEXTOR, CD-ROM PX-32TS, 1.03> SCSI2
5/cdrom removable
trm0: interrupting at irq 5
-----------------------------------------------------[dmesg output-end]

Enjoy!

/martin