Crash at rebooting and boot dump does not work.

[Han <han_(_at_)_mijncomputer_(_dot_)_nl>]

Well I wanted to make this a decent report but I  won't  make  it  since
boot dump does not work. I have to type it all.

First the boot dump error:

ddb> boot dump
uvm_fault(0xe05379a8, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Faulted in DDB; continuing...

Now the crash error:
The situation is like this: I have a desktop system and a firewall with openbsd current. If I reboot the desktop I get the same crash. But this crash is caused by rebooting the firewall!
The nfs partitions were not mounted.

Stopped at _udp_check_ipsec+0x95:  testb   $0x2,0x6(%eax)

ddb> trace
_udpcheck_ipsec(e0b17500,e05bbbe4,44a0210,101a8c0,0,0,e0b17500,7e,fce8,1c,4,e02f776d) at _udp_check_ipsec+0x95
_udp_input(e0b17500,14,0,0,e0b17500) at _udp_input+0x5d7
_ipv4_input(e0b17500,f1a0d4e0,e0a90c80,f1a0d4e0) at _ipv4_input+0x733
_ipintr(10,10,f1a0d4e0,f1a0d4e0,f1,a1bf14) at _ipintr+0x8d
Bad frame pointer: 0xf1a1be88

ddb> ps
  PID	PPID	FLAGS	WAIT	COMMAND
4863    1       0x40184	select	sendmail
29282	1	"	ttyin	getty
4x getty
21224	1	0x84	select	cron
8104	1	"	"	sshd
29050	23010	"	nfsd	nfsd
10699	"	"	"	"
380	"	"	"	"
19122	"	"	"	"
23010	1	"	netcon	nfsd
25670	"	"	select	mountd
17937	"	"	"	portmap
27797	"	"		syslogd
13955	"	"	poll	dhclient
11610	0	0x100284nfsidl	nfsio
2813	"	"	"	"
26151	"	"	"	"
19427	"	"	"	"
10	"	"	usbevt	usb1
9	"	"	"	usb0
8	"	"	apmev	apm0
7	"	"	crypto_wa crypto
6	"	"	aiodoned aiodoned
5	"	"	syncer	update
4	"	"	cleaner	cleaner
3	"	"	reaper	reaper
2	"	"	pgdaemon pagedaemon
1	"	0x4084	wait	init
0	-1	0x80204	scheduler swapper

dmesg of the desktop included. I know this is  not  exactly  the  way  I
should report a bug but I have improvise atm. Let me know  if  you  want
more info.


Cya, Han.
s0: AT/286+(00) BIOS, date 03/28/02, BIOS32 rev. 0 @ 0xfdad0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf7f00/192 (10 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1106 product 0x3147
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 Host-PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 GTS" rev 0xa3
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ne3 at pci0 dev 6 function 0 "Realtek 8029" rev 0x00: irq 10
ne3: address 52:54:ab:13:d9:64
rl0 at pci0 dev 7 function 0 "Realtek 8139" rev 0x10: irq 12 address 00:e0:4c:67:52:80
rlphy0 at rl0 phy 0: RTL internal phy
emu0 at pci0 dev 10 function 0 "Creative Labs SoundBlaster Live" rev 0x07: irq 10
ac97: codec id 0x54524123 (TriTech Microelectronics TR28602)
audio0 at emu0
"Creative Labs SoundBlaster Live Digital Input" rev 0x07 at pci0 dev 10 function 1 not configured
pcib0 at pci0 dev 17 function 0 "VIA VT8233 PCI-ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL CX10.2A>
wd0: 16-sector PIO, LBA, 9787MB, 16383 cyl, 16 head, 63 sec, 20044080 sectors
wd1 at pciide0 channel 0 drive 1: <ST340823A>
wd1: 16-sector PIO, LBA, 38166MB, 16383 cyl, 16 head, 63 sec, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
probe(atapiscsi0:0:0): Sense Error Code 32
probe(atapiscsi0:0:0): Sense Error Code 32
cd0 at scsibus0 targ 0 lun 0: <BDV 108A, DVDROM 00/03/21, 2.00> SCSI0 5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c060 netmask d460 ttymask d4e2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
wd0: no disk label
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312
WARNING: / was not properly unmounted
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
ums0 at uhidev0: 4 buttons and Z dir.
wsmouse0 at ums0 mux 0
wsdisplay0: screen 5 deleted
wsdisplay0: screen 5 added (80x50, vt100 emulation)
uvm_fault(0xe05379a8, 0x0, 0, 1) -> e
rebooting...
OpenBSD 3.1-current (GENERIC) #2: Tue Jun 25 20:15:48 CEST 2002
    root_(_at_)_sesamstraat:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon Model 6 (Palomino) ("AuthenticAMD" 686-class) 1.47 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 267956224 (261676K)
avail mem = 242708480 (237020K)
using 2844 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/28/02, BIOS32 rev. 0 @ 0xfdad0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf7f00/192 (10 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1106 product 0x3147
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 Host-PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 GTS" rev 0xa3
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ne3 at pci0 dev 6 function 0 "Realtek 8029" rev 0x00: irq 10
ne3: address 52:54:ab:13:d9:64
rl0 at pci0 dev 7 function 0 "Realtek 8139" rev 0x10: irq 12 address 00:e0:4c:67:52:80
rlphy0 at rl0 phy 0: RTL internal phy
emu0 at pci0 dev 10 function 0 "Creative Labs SoundBlaster Live" rev 0x07: irq 10
ac97: codec id 0x54524123 (TriTech Microelectronics TR28602)
audio0 at emu0
"Creative Labs SoundBlaster Live Digital Input" rev 0x07 at pci0 dev 10 function 1 not configured
pcib0 at pci0 dev 17 function 0 "VIA VT8233 PCI-ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL CX10.2A>
wd0: 16-sector PIO, LBA, 9787MB, 16383 cyl, 16 head, 63 sec, 20044080 sectors
wd1 at pciide0 channel 0 drive 1: <ST340823A>
wd1: 16-sector PIO, LBA, 38166MB, 16383 cyl, 16 head, 63 sec, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
probe(atapiscsi0:0:0): Sense Error Code 32
probe(atapiscsi0:0:0): Sense Error Code 32
cd0 at scsibus0 targ 0 lun 0: <BDV 108A, DVDROM 00/03/21, 2.00> SCSI0 5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c060 netmask d460 ttymask d4e2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
wd0: no disk label
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312
WARNING: / was not properly unmounted
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
ums0 at uhidev0: 4 buttons and Z dir.
wsmouse0 at ums0 mux 0
wsdisplay0: screen 5 deleted
wsdisplay0: screen 5 added (80x50, vt100 emulation)