[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
sk0: no PHY found!
- To: tech_(_at_)_openbsd_(_dot_)_org
- Subject: sk0: no PHY found!
- From: Okan Demirmen <okan_(_at_)_demirmen_(_dot_)_com>
- Date: Wed, 16 Mar 2005 10:19:19 -0500
- Mail-followup-to: tech_(_at_)_openbsd_(_dot_)_org
hi all - so i'm having a small issue with sk(4) on an asus a8v amd64
motherboard. the device works with pxeboot(8), so i've ruled out a
physical problem. i've played with many options in the bios, from
disabling acpi/apm and other various settings without success. one
bug report (kernel/4041) was submitted then closed awhile ago, but
-current doesn't work for me (not sure about OP).
anyone else with a similar issue?
thanks.
OpenBSD 3.7 (GENERIC) #23: Wed Mar 16 00:09:37 MST 2005
deraadt_(_at_)_amd64_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1073016832 (1047868K)
avail mem = 909230080 (887920K)
using 22937 buffers containing 107507712 bytes (104988K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3200+, 2002.88 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 vendor "VIA", unknown product 0x0282 rev 0x00
pchb1 at pci0 dev 0 function 1 vendor "VIA", unknown product 0x1282 rev 0x00
pchb2 at pci0 dev 0 function 2 vendor "VIA", unknown product 0x2282 rev 0x00
pchb3 at pci0 dev 0 function 3 vendor "VIA", unknown product 0x3282 rev 0x00
pchb4 at pci0 dev 0 function 4 vendor "VIA", unknown product 0x4282 rev 0x00
pchb5 at pci0 dev 0 function 7 vendor "VIA", unknown product 0x7282 rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x5960 rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "ATI", unknown product 0x5940 (class display subclass miscellaneous, rev 0x01) at pci1 dev 0 function 1 not configured
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 7 function 0 not configured
skc0 at pci0 dev 10 function 0 "Marvell SKv2" rev 0x13: irq 11
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3 (0x7)
sk0 at skc0 port A: address 00:11:d8:2f:05:16
sk0: no PHY found!
fxp0 at pci0 dev 14 function 0 "Intel 82557" rev 0x04, i82558: irq 7, address 00:a0:c9:b1:06:72
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
pciide0 at pci0 dev 15 function 0 "VIA VT8237 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide1 channel 0 drive 0: <ST340014A>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-RW CRX320E, NYK5> SCSI0 5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 10
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
"VIA VT8237 ISA" rev 0x00 at pci0 dev 17 function 0 not configured
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 10
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auvia0
pchb6 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb9 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
lm0 at isa0 port 0x290/8: W83627THF
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
Okan Demirmen <okan_(_at_)_demirmen_(_dot_)_com>
PGP-Key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xB3670934
PGP-Fingerprint: 226D B4AE 78A9 7F4E CD2B 1B44 C281 AF18 B367 0934
Visit your host, monkey.org